6.5 Creedmoor Peak

[PoleX]

I'll start growing my hair out.

 

[Big Sky Guy]

I’m not a lighthouse customer. I’ll give this a decade before I do anything retarded like spending cash on brass, dies, etc.. I’m weird that way.

Why wasn't it retarded buying all that stuff for your 6.5PRC just a few years after the cartridge release date when the 6.5CM had well over a decade of a track record at that point?

It's ok if you hate it, just trying to follow your logic.

 

[Big Sky Guy]

I was tracking a bull through the timber with my 26” browning in 7 mag with an awful loud break last weekend. Thinking to myself, how nice a suppressed 20-24” gun would have been. Just exploring some options lol. The creedmoor is getting the last laugh on this one

It’s pretty nice. I think 20” is max and what mine is, 18” would for sure be handier with suppressor even with this small one it still adds a hair over 4”. Maybe I was ruined hunting with it before a suppressor and got used to the overall 20” length, maybe 16” is even better then.

No regrets on my 6.5CM, albeit I would have purchased a 308 just the same as I’m not sure there is much difference between the two for my use case and was dictated by rifle availability and being on sale.

 

[mtmuley]

Why wasn't it retarded buying all that stuff for your 6.5PRC just a few years after the cartridge release date when the 6.5CM had well over a decade of a track record at that point?

It's ok if you hate it, just trying to follow your logic.

I think he might know guys that had the equivalent of a decade worth of loading and shooting the PRC in just a few years. Just a guess. mtmuley

 

[Point Creep]

Why wasn't it retarded buying all that stuff for your 6.5PRC just a few years after the cartridge release date when the 6.5CM had well over a decade of a track record at that point?

It's ok if you hate it, just trying to follow your logic.

Who hates what? I didn't buy any specialty dies required for steel cases, probably never will. Is this thread about the "peak" ammo hype or somebody's favorite rifle caliber?

My coment you quoted above was for taking advantage of "Peak" as a handloader, in likely other chamberings. I'd never buy a new rifle to use with some factory ammo that is allegedly earth shattering. That would be really dumb.

 

[Big Sky Guy]

Who hates what? I didn't buy any specialty dies required for steel cases, probably never will. Is this thread about the "peak" ammo hype or somebody's favorite rifle caliber?

My coment you quoted above was for taking advantage of "Peak" as a handloader, in likely other chamberings. I'd never buy a new rifle to use with some factory ammo that is allegedly earth shattering. That would be really dumb.

My comment was in jest to the seeming contrast that you were willing to buy dies and brass for your PRC, which was a few years new at the time, but now with +peak you said needs at least a decade. I missed you were meaning trying Peak for PRC/other calibers and I understand brass is not a novel/new/unproven material like the peak.

To clarify, based on what happened with Hornady 7PRC ammo debacle, and the significant delays in this "earth shattering" ammo getting on shelves I'm a little skeptical of the whole thing. Time will tell.

It still seems more intriguing and novel to me than another new cartridge.

 

[Point Creep]

The whole "Peak +P" thing is something i'd want to be vetted out before i followed some bandwagon led by ammo marketeers. What's the brass life, issues, costs, hassles, etc. Who knows? I know a lot of gun guys, but not a single one that reloads 7 backcountry or 6.5 manbun +P. I'm completely unfamiliar with a hornady 7PRC ammo debacle. I'm only familiar with some components when they are hard to find.

For a few extra FPS, it's not fuggin much and a lot of "HYPE".

Nice elk is that last week?!?

 

[Point Creep]

@Big Sky Guy - and don'e feel inadequate with your 6.5 manbun. Size isn't everything. My next rifle investment could be an even smaller 6 manbun or more likely a 6 Gay Tiger. The "G" in Gay and inventor of the 6.5 PRC is somebody I've met, shot fancy rifles with and sat in hunting camp with. When my kids were real little, they were shooting animals with 6/6.5 suppressed criedmoor/GAP rifles and that was literally a decade ago.

The steel in the brass stuff is for somebody way more of an early adopter than me.

 

[PoleX]

It’s pretty nice. I think 20” is max and what mine is, 18” would for sure be handier with suppressor even with this small one it still adds a hair over 4”. Maybe I was ruined hunting with it before a suppressor and got used to the overall 20” length, maybe 16” is even better then.

No regrets on my 6.5CM, albeit I would have purchased a 308 just the same as I’m not sure there is much difference between the two for my use case and was dictated by rifle availability and being on sale.

View attachment 420795

View attachment 420796

Good to know the CM can kill an elk with a standard velocity load. How many times did you need to reload the magazine?

Personal opinion: I think federal knocked it out of the park with their bullet selection across the 6 different options in high pressure variants. Hopefully 1/5 i'd be interested in will shoot sub minute.


If not there's about a bazzilion other options 200 fps slower in the standard cases...

@Point Creep, Serious question; if you don't reload and you're looking into buying a new rifle, how do you pick cartridge outside of starting with load/bullet data? I can't shake the fact that a factory loads in 6.5 HP creedmoor outperforms the 6.5 PRC in current factory selection with a shorter barrel. I've seen enough to consider that fact. Why would I want a 6.5 prc as a factory ammo only guy over a Creedmoor other than the manbun stigma? I'm about to drop 2.5K on a slick setup so I'd prefer to not blow my money on a regret.

 

[mtmuley]

@Big Sky Guy - and don'e feel inadequate with your 6.5 manbun. Size isn't everything. My next rifle investment could be an even smaller 6 manbun or more likely a 6 Gay Tiger. The "G" in Gay and inventor of the 6.5 PRC is somebody I've met, shot fancy rifles with and sat in hunting camp with. When my kids were real little, they were shooting animals with 6/6.5 suppressed criedmoor/GAP rifles and that was literally a decade ago.

The steel in the brass stuff is for somebody way more of an early adopter than me.

Kinda surprised you aren't shooting a GAP. mtmuley

 

[Point Creep]

I can't shake the fact that a factory loads in 6.5 HP creedmoor outperforms the 6.5 PRC in current factory selection with a shorter barrel. I've seen enough to consider that fact. Why would I want a 6.5 prc as a factory ammo only guy over a Creedmoor other than the manbun stigma? I'm about to drop 2.5K on a slick setup so I'd prefer to not blow my money on a regret.

Don't let me sway your opinions before spending money - but i'm not sure about your facts and criteria of "performance".

There's absolutely nothing wrong with a 6.5 creedmoor.

But, factory ammo, regardless of the velocity printed on the box, is highly unlikely to "outperform" ammo loaded by somebody that knows what they're doing. Buy the criedmoor and let's go shooting next summer. I'll bring my 19" .223 and we can see how they cut the mustard.