6.5 Creedmoor Peak

[mtmuley]

I’m assuming they are loading 7BC?

That and a lot of info with the NAS3 case. Assuming info carries over no matter the cartridge. mtmuley

 

[Drake4]

Advertising 2900 with a 156 grain Berger out of a 20” 6.5 creedmoor whether they actually get that is another story. The handful of 6.5 prc you’d have had to lean on them pretty hard to get 2900 out of a 20”. Plus the 6.5 creedmoor will have quite a bit less recoil

Thanks. Guess I was looking at the 130-140gr published range, and it is under the PRC.

 

[Big Sky Guy]

Hype didn’t make me buy any rifles in the last 25 years. I bought that seekins as a good friend had one before me and I really liked it. 6.5prc because I was steered that direction by a handful of friends that shoot way more of a lot of things than I ever will in addition to a giant headstart on years of loading for it. It’s unlikely I’ll ever chamber a factory made piece of ammo in it but you never know.

Sounds like your friends hyped it for you . . .

 

[brockel]

Thanks. Guess I was looking at the 130-140gr published range, and it is under the PRC.

Factory vs factory

 

[Point Creep]

Sounds like your friends hyped it for you . . .

100%

The hype of a nice shooting rifle, that's easy to get to shoot well, even if slower and smaller, is pretty great.

 

[Point Creep]

Factory vs factory
View attachment 420690View attachment 420691

$4 a shot. That's some expensive rock dusting practice right there.

 

[brockel]

$4 a shot. That's some expensive rock dusting practice right there.

Closer to $50/box on Midway. Considering probably 95% of hunters shoot a box a year. Not a huge investment. Hell there’s people that pay hammer prices for bullets at $100+/box of 50

 

[Drake4]

Factory vs factory

Good Point. Guess I've never looked at the factory PRC.
Reloading gets you quite a bit more....but I guess you could probably say the same if you reloaded the new Creed round too.

 

[Buffs35]

That's expensive for a .243!

 

[mtmuley]

That's expensive for a .243!

Cool guys don't shoot a .243. mtmuley

 

[Nick87]

That's expensive for a .243!

More like a .260 rem.

 

[El Jason]

Cool guys don't shoot a .243. mtmuley

Amen

 

[PoleX]

I was actually hunting a lot before I bought my element with a borrowed 6.5 GAP and lost fps by not going that route. It wasn’t the decision maker. I’m rebarrelling my 6.5prc to a shorter barrel - last concern was losing a few fps.

You’re going to blow a bunch of unburned powder through that ribbed suppressor cutting off another inch.

Sounds like you need a creedmoor

 

[mtmuley]

Amen

Except for me and you of course. mtmuley

 

[brockel]

Backordered a box of the 153 tmk and a box of the 156 bergers. I’ll try them out for the group. See how they do from an 18” tikka

 

[PoleX]

Backordered a box of the 153 tmk and a box of the 156 bergers. I’ll try them out for the group. See how they do from an 18” tikka

This thread will be 30 pages before someone post a muzzle velocity, barrel length, group. BootlickerSlide probably has 80 pages on it by now.