Painting my bathroom ceiling 🔨

A properly installed ridge vent should be plenty sufficient. Like Gerald said, make sure the wood is cut back sufficiently and the roofing paper isn’t blocking airflow. The “sponge is part of the vent system. It keeps bugs out.
 
A properly installed ridge vent should be plenty sufficient. Like Gerald said, make sure the wood is cut back sufficiently and the roofing paper isn’t blocking airflow. The “sponge is part of the vent system. It keeps bugs out.
Ended up having a buddy help install one of these directly over the bathroom.
Prob not up to ht code, but better than what I had.
Ceiling turned out good enough for me.
Ended up slapping a coat of paint on the walls and re-caulking the tub.
Bought some rust oleum gel cleaner that did a pretty good job of getting the rust if the tile.
Spray painted ceiling fan/boob light is a masterpiece.
Hopefully it lasts another 6 years 🤞

8804E937-892E-43F3-B934-B715B459E3CC.jpeg

029DABA0-48D4-421D-8FB8-FABB1CAC4C46.jpeg
 
Did you duct the fan to the vent? I don't see any ridgeline vent in that photo. Just the usual asphalt shingle shiplap.
 
Ended up having a buddy help install one of these directly over the bathroom.
Prob not up to ht code, but better than what I had.
Ceiling turned out good enough for me.
Ended up slapping a coat of paint on the walls and re-caulking the tub.
Bought some rust oleum gel cleaner that did a pretty good job of getting the rust if the tile.
Spray painted ceiling fan/boob light is a masterpiece.
Hopefully it lasts another 6 years 🤞

View attachment 267240

View attachment 267242
Hmmm ... if it was mine I'd get some sealant around the vent and cover the tapcons ? I don't see a ridge vent either .
 
Back
Top