Off Season Upgrades and Tinkerings...

[1100RemingtonMan]

I love those Grand Slams, wish I hadn't sold mine. Details on the rifle?

Rifle is a mid 1970’s Remington 700 BDL 6mm Rem. That I bought new when I was a teenager.

 

[Dougfirtree]

My Bergara B-14 Hunter is a great shooter and has been very easy to load for, but I wasn’t crazy about the stock, and the bluing was junk and prone to surface rust. So I:
• Replaced the stock with a Grayboe Outlander
• Had the bolt fluted at LRI cuz I think it looks cool and @JLS has assures me it’ll increase my MV by at least 100 fps. @Schaaf’s words about spiral fluting also piqued my interest...
• Had the barreled action cerakoted in midnight bronze and the bolt and bottom metal done in blackout.
• Installed a Timney Calvin Elite set at two pounds. (I actually like the Bergara trigger just fine, but I got the Timney for free so why not?)

The picture is bad but I like the way the rifle turned out. View attachment 177604

I like it! How did your changes affect weight? I've always thought those Bergaras were a good deal, but they're heavy for my tastes.

 

[BrentD]

I bent a stock on one of my shotguns. I am not trying to figure out how to do leather covered buttpads on that one and one other.

This is a William Cashmore 12b undergoing the bending treatment.

Next up will be rejuvenating my boat and converting it to a duck hunting rig. New bearings for the trailer, etc.

 

[mtmuley]

Gonna use the same rifle, same load and head to the same place to kill a bull. Boring regularity, but I'll take it. mtmuley

 

[rwc101]

Kicking around the idea of trying my hand at adding pillars/bedding the new 243.

 

[rtraverdavis]

I like it! How did your changes affect weight? I've always thought those Bergaras were a good deal, but they're heavy for my tastes.

Thanks! I haven’t weighed it, but it feels a tad lighter. If it’s lighter, I’d bet it’s by no more than a couple ounces. I like the Grayboe stock a bunch.

 

[Jbotto]

Kicking around the idea of trying my hand at adding pillars/bedding the new 243.

I think you and I will both be tackling pillars then! Hope it goes well for you! Good luck!

 

[El Jason]

I think you and I will both be tackling pillars then! Hope it goes well for you! Good luck!

Stress-Free Pillar Bedding

6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma...

www.6mmbr.com

 

[Jbotto]

Stress-Free Pillar Bedding

6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma...

www.6mmbr.com

Thank you! I have read tons of articles, forum posts and anything else I can glean about it. This looks like a really good read. I appreciate you sending this!

 

[El Jason]

Training my dog to be a grade A blood tracker.

 

[Qubo]

Before Covid I bought a brand new VX-5HD for my .300wm. Wanted to develop a new non lead load before ordering my custom CDS. Then Covid hit and between the shut down and then the shortage of supplies I was unable to get a good load made. Now the scope is over a year old and I don’t have a load for it or a custom dial. I have scraped together just enough components to hopefully get it done this spring.

 

[mtmuley]

Before Covid I bought a brand new VX-5HD for my .300wm. Wanted to develop a new non lead load before ordering my custom CDS. Then Covid hit and between the shut down and then the shortage of supplies I was unable to get a good load made. Now the scope is over a year old and I don’t have a load for it or a custom dial. I have scraped together just enough components to hopefully get it done this spring.

Bullets readily available from Hammer. mtmuley

 

[Qubo]

Bullets readily available from Hammer. mtmuley

You’ve given me something to think about. I‘ve got about 60 e-tips left and have always been a Nosler guy. I really want to make them work. But the little testing I did was so so. And I’ve been reading all the great things people are saying about the Hammers. I’ve got a new powder to try as I’m hoping to develop a load out of components still available during an ammo panic/shortage so I‘m not in a similar situation as I was this season (3 rifle tags with only 10 rounds to my name). The fact that Hammers are available and E-tips are not fits that plan as well.

 

[Northgaaire]

To do in spring 2021:
M70 Classic SM in.375H&H - Cerakote the barreled action and bottom metal in gun metal gray
M336 suppressed - dial in the trajectory/Burris Ballistic plex 2-7x for the Hornady Subsonic 175gr ammo
M98 custom .405win - check the Hornady 300gr sightin with the Williams Foolproof sight, add a barrel band front sling swivel
M700 7mm-08 heavy barrel- test the Leupold CDS at 300-400yds with the Barnes 120gr

 

[RaiderRich]

I have a thread on my updates to my Marlin XL7 in 30-06. New Boyds stock and scope. Likes shooting Federal Fusions in 165gr.

 

[ludville1]

Ordered a new Winchester Model 70 Super Grade Stainless in .264 Win. mag., should be here Tuesday. That rifle/caliber is one that I have been thinking about for a long time. Already got 2 boxes of factory Nosler Accubond 130 gr. ammo, and Leupold rings and bases for it, and just ordered the Butler Creek Flip Open Scope Covers, and Leupold VX-5/VX-6 throw lever for the upcoming scope. I have a certain scope in mind for it, and @schmalts will let me know when he sees one. This will likely be the last gun that I buy...might as well go out with a "bang", lol!