Gun vault flooring

mtmuley

Well-known member
Joined
Jan 11, 2009
Messages
14,423
Location
montana
I am on a project that has a gun vault, large safe door, built-in display cabinets with glass doors and a ton of storage cabinets. It is all done in walnut with a rubbed tung oil finish. My reccomendation for the flooring (concrete now) is a high quality tight weave wool carpet, low nap. What would, or what have you guys done? The firearms stored in this vault will be high end. I will be able to use any feedback to make a decision.Thanks, mtmuley
 
Carpet would be quieter and warmer, a free floating wood floor say bamboo would look great with you cabinetry. Good look and post a picture.
 
IMO carpet would add fibers into the area when walked on and disturbed would hence mean more dust and debris on the cabinets. I would stick with something fiberless. Wood or just stamp and color the concrete.
 
Stained concrete in Montana would be chilly. I have stained concrete in home in Arizona and is great since feels cool in summer when is over 100F outside. In winter, is a bit chilly, though. Not sure would be a good fit in Montana unless have an area rug if you will be barefoot in the zone of the home.
 
Stained concrete in Montana would be chilly. I have stained concrete in home in Arizona and is great since feels cool in summer when is over 100F outside. In winter, is a bit chilly, though. Not sure would be a good fit in Montana unless have an area rug if you will be barefoot in the zone of the home.

In floor heating solves that issue :)
 
I was also thinking that since the firearms the vault is built for will be, let's say, very high quality, carpet would add a measure of protection if one happened to contact the floor. I like the warmness aspect also. mtmuley
 
Humidity in a basement is the biggest issue for firearms. Assuming that's under control, I would think them about what happens on carpet when a small screw, firing pin or other item falls.You also would need to think about the grease, wood oils, etc that will be in the room for maintenance A tight weave wool carpet should be ok but will stain after a few years. I would prefer wood flooring or concrete. In floor heating, as suggested above, would be nice if the budget allows. If not, a good wool knap area rug would be a good solution as well, and easily replaceable.

Sounds like a fun project.
 
short, dense wool carpet has got to be about perfect. , High end guns often will have metal, horn or no butt-plates, so you don't want a hard surface for the invariable "lean ups" that happen when you are handling guns. I had a piece of wool carpet that was leftover from a job, that was on the floor of my "gun area" for about 8 years of very hard use. Easiest cleaning, best wearing floor covering I ever saw. Wool carpet is in a category all it's own. It is also about the only thing I can think of that will not take away from the classy look of walnut.
 
NEW Sitka Ambient 75

Latest posts

Forum statistics

Threads
111,382
Messages
1,956,755
Members
35,153
Latest member
Lucafu1
Back
Top