Woodworking Hunt Talkers?

[Indianajoe]

don't be afraid of a good used saw. sometimes I see good old delta unisaws for about the price of a good hybrid. lots of other good used out there. it may help you stretch your dollar or just get more for your money.

 

[hank4elk]

Anyone have any recommendations for a mid level table saw? I have 110v, and my job site kobalt saw is a nightmare. Nothing is square and the throat is warped causing stock to get hung up. I’d like to go the hybrid cabinet saw route. I was saving up for a saw stop, but that fund got pilfered for a well deserved set of diamond earrings. I see grizzly has a few hybrid saws that are fairly affordable, Laguna has the Fusion F1, and also the rigid/delta contractor saws for around $600 and cheaper on marketplace. The saw stop is way more then I want to spend or need for my current skill level, but I keep coming back to the safety feature. I know the rigid/delta would be a huge step up from what I have, but is it worth saving a little more for the grizzly or Laguna?

Dewalt 850, 3/4 horse.

Better than my old Sears or Ingersol/Rand.
Had a small Makita,but it was a jobsite toy.

 

[tread]

I’ve got a ridged hybrid saw with a cast too. Served me very well. I upgraded the fence. In my opinion upgrading the fence on a decent saw can make it a great saw.

 

[Kaitum]

Cedar lined white oak blanket chest. The oak was milled from a tree on my family's farm in the early 90's. Took me far too long to make a suitable place to store afghans from grandmothers and great grandmothers.

 

[TheBenHoyle]

I finally finished up a belated Christmas present for my brother in law. Originally he just wanted a rack where he could organize his paints that he uses for painting miniatures for various games.

I decided to complexify the project a little and create a box with collapsible trays. It is in no way the best work I've ever done in terms of technical ability but I was doing a lot of things for the first time. I enjoyed trying box joints for the first time but I didn't do a great job on them.

Also, it was a real course in engineering on the fly as I tried to design a tray system that could lay flat when the box is closed and tier up when the box was open.







It was a fun project and I am glad a pushed myself to try some new things. I'll certainly try some of these things again in the future.

 

[Redmt]

I finally finished up a belated Christmas present for my brother in law. Originally he just wanted a rack where he could organize his paints that he uses for painting miniatures for various games.

I decided to complexify the project a little and create a box with collapsible trays. It is in no way the best work I've ever done in terms of technical ability but I was doing a lot of things for the first time. I enjoyed trying box joints for the first time but I didn't do a great job on them.

Also, it was a real course in engineering on the fly as I tried to design a tray system that could lay flat when the box is closed and tier up when the box was open.

View attachment 269202
View attachment 269203
View attachment 269204
View attachment 269205
View attachment 269206

It was a fun project and I am glad a pushed myself to try some new things. I'll certainly try some of these things again in the future.

Beautiful!

 

[OntarioHunter]

I finally finished up a belated Christmas present for my brother in law. Originally he just wanted a rack where he could organize his paints that he uses for painting miniatures for various games.

I decided to complexify the project a little and create a box with collapsible trays. It is in no way the best work I've ever done in terms of technical ability but I was doing a lot of things for the first time. I enjoyed trying box joints for the first time but I didn't do a great job on them.

Also, it was a real course in engineering on the fly as I tried to design a tray system that could lay flat when the box is closed and tier up when the box was open.

View attachment 269202
View attachment 269203
View attachment 269204
View attachment 269205
View attachment 269206

It was a fun project and I am glad a pushed myself to try some new things. I'll certainly try some of these things again in the future.

Did you use a jig to cut the box joints?

 

[TheBenHoyle]

Did you use a jig to cut the box joints?

I did use a jig. I watched a bunch of You Tube videos and then went with the most simple jig but it ended up being a little less exact than I wanted. Next time I do a box joint I will make a better jig.

 

[OntarioHunter]

I did use a jig. I watched a bunch of You Tube videos and then went with the most simple jig but it ended up being a little less exact than I wanted. Next time I do a box joint I will make a better jig.

I used a Wolf (German) router jig. Not the greatest but I can probably blame most of the difficulty on improper router bit (not long enough for 3/4" lumber = making two cuts for every notch). Also, cherry I used for gun case has a propensity to gum up the cutters.

 

[JFish]

Just finished up 1/3 of this built in. So far it’s been a lot of fun and I got to learn some new techniques. I was surprised how solid the carcass was by using dados and rabbets. I also learned that walls are not square and caulk is my friend. There will eventually be a matching upper and I will put some panels on the wall and trim it out, maybe even some drawers.

 

[millerkiller77]

Just finished up 1/3 of this built in. So far it’s been a lot of fun and I got to learn some new techniques. I was surprised how solid the carcass was by using dados and rabbets. I also learned that walls are not square and caulk is my friend. There will eventually be a matching upper and I will put some panels on the wall and trim it out, maybe even some drawers.

Pocket holes on the face frame?

 

[JFish]

Pocket holes on the face frame?

Nope I broke out the biscuit jointer to assemble it which worked out really well. I just brad nailed and glued it to attach it. I used hard maple since so it would hold up to more abuse then poplar.

 

[Dsnow9]

 

[JEL]

I am no woodworker but one of my boys is good at just about anything he tries. He made this bar for the farmhouse out of stuff laying around the farm. Total cost was zero other than a little glue and stain.

 

[beagle001]

Great thread. Did some woodworking in high school and trade school, then went to build pole barns for a bit and lost some of those finer skills, then went back to farm and lost most of the rest of the skills.

Preparing to remodel my grandpa’s house before we move in and I’m hoping to rekindle some of my lost skills… getting started buying tools is a B, but we will see what I come up with. Thanks for the motivations, folks!

 

[BrentD]

meager skills, but I am proud of it. Just a chunk of ash from a stump.

 

[Redmt]

meager skills, but I am proud of it. Just a chunk of ash from a stump.

View attachment 272572

That is amazing. You were able to get a can of Stout out of a stump! Think of what you could have done with the whole tree.

 

[LuketheDog]

I jumped on the epoxy bandwagon this year and turned a cracked up old maple round from my wife's childhood home into a side table. I've never done epoxy before, what a pain in the butt that was...

 

[BenP]

Had time to finish up a lathe tree to add to the wife's collection.

 

[OntarioHunter]

Had time to finish up a lathe tree to add to the wife's collection.

View attachment 273839
View attachment 273843

Guess she's starting a gourmet snowcone franchise?