Hammer Bullets - what makes them so great?

[Potsie]

The HHT bands are much more gradual/less pronounced than on the other Hammers. Think the bore could have just smoothed them out so that they aren't as visible?

The bands do get lost in the sauce a bit, but still visible.

 

[Sheltowee]

View attachment 389054

The bands do get lost in the sauce a bit, but still visible.

Yeah, I don't know then.

 

[MTLabrador]

My theory is someone else made a bad shot on that bear with an Etip and didn’t kill it. Wouldn’t be hard to do if you don’t understand bear anatomy vs deer and elk.

 

[brockel]

My theory is someone else made a bad shot on that bear with an Etip and didn’t kill it. Wouldn’t be hard to do if you don’t understand bear anatomy vs deer and elk.

Looking like your theory might be right
Expanded bullet weighs 183 grains. Micrometer was dead so no measurements.

 

[Hammsolo]

Looking like your theory might be right
Expanded bullet weighs 183 grains. Micrometer was dead so no measurements.
View attachment 389073

A thing of beauty.

 

[Nicoli7153]

After switching to unleaded years ago I was a Barnes bullet fan. They never let me down but had some kills where the animal went a bit further than I expected. After reviewing the terminal performance of Hammers and the accuracy people were getting I wanted to try them. I had a new rifle that I didn’t have any Barnes bullets for so I ordered some Hammers. I even emailed Steve and he was more than helpful. I shot a pronghorn lat week with it. It was further than what I would have used a Barnes on and the result was a a dead buck. Once I use up my Barnes in my other rifles I am switching them all to Hammers.

I believe I read on their forum that it is advisable (for best performance) to clear all the copper from a barrel before switching to Hammers from other solid copper (e.g. Barnes) and cup and core bullets. The copper on the Hammer Bullets is softer than other copper solids and cup and core bullets.

Please correct me if I got that wrong.

 

[mevertsen]

I believe I read on their forum that it is advisable (for best performance) to clear all the copper from a barrel before switching to Hammers from other solid copper (e.g. Barnes) and cup and core bullets. The copper on the Hammer Bullets is softer than other copper solids and cup and core bullets.

Please correct me if I got that wrong.

I believe that is correct.

 

[Redman]

I believe I read on their forum that it is advisable (for best performance) to clear all the copper from a barrel before switching to Hammers from other solid copper (e.g. Barnes) and cup and core bullets. The copper on the Hammer Bullets is softer than other copper solids and cup and core bullets.

Please correct me if I got that wrong.

You are correct. If you switch from shooting lead core bullets and don’t clean your bore you won’t have the accuracy you are looking for. I have experienced this and know others that have as well.

 

[DamascusSteel]

Picked up some Power hammers for my 300 WSM

 

[Ballistic]

View attachment 293600


Have thoroughly enjoyed loading Hammers this summer. Definitely accurate and easy to load. Almost so accurate it’s hard for me to make a decision on which load to go with. That ES I have no doubt was due to my lack of truly accurate powder measuring.

Loved being able to call Hammer, getting an answer on the second ring, and chatting for 10 minutes about some issues I was having. Super friendly team up there.

My dad also ordered me some Maker bullets to try, also a pure copper bullet, little different school of thought with the fragmentation vs holding together.

Unless you were measuring powder with a shot glass, that ain't it. A full grain of powder usually doesn't yield 55 FPS of velocity difference. What's your fill ratio?