Cast iron part II.

[mtmuley]

What should I do with this? Griddle off of a camp stove. mtmuley

 

[Jnasa]

I would hit it up with some steel wool. Heat it up and scrap. Once rust is removed wash it thoroughly. Then start seasoning.

There are other methods for removing rust. Baking soda and vinegar can be used to help also.

 

[mtmuley]

I would hit it up with some steel wool. Heat it up and scrap. Once rust is removed wash it thoroughly. Then start seasoning.

There are other methods for removing rust. Baking soda and vinegar can be used to help also.

Wire wheel on a grinder a bad idea? mtmuley

 

[elkantlers]

Set it on a hill 1000yds away and see if you can hit it.

 

[Hem]

View attachment 418048
What should I do with this? Griddle off of a camp stove. mtmuley

You definitely can bring that around.

 

[Jnasa]

Wire wheel on a grinder a bad idea? mtmuley

You can and I've seen others do that. Would be faster for sure.

 

[El Jason]

What should I do with this?

Send it to me.

 

[El Jason]

Wire wheel on a grinder a bad idea? mtmuley

A wire wheel is fine. Rinse with hot water and soap when you’re done, then wipe with vinegar.

Pop it in a 200 degree oven for 15 minutes then crank the heat to 450 and start seasoning.

 

[buckbull]

Anyone use skyco ospho on cast iron pans? It worked wonders on some rusted barn metal.

 

[mtmuley]

Set it on a hill 1000yds away and see if you can hit it.

I can. No problem. But I need it. mtmuley

 

[mtmuley]

I have this one too. But the other fits the stove better. mtmuley

 

[rideold]

I recovered one with a wire wheel. It had been sitting in the weather for quite a while before I got it. Cleaned up just fine.

 

[BucksnDucks]

Doesn't really look too bad. I've used flat tops in worse condition. I would heat and oil it. Then clean as usual, maybe with some salt. Repeat and reevaluate.
Or just be a good redneck and make a target out of it.
The second one is perfection; you are setting a high bar.

 

[Moserkr]

My wife wanted polished cast iron... then decided she didnt like them anyway lol. Grind away on em if you want. I went from 60 grit all the way up to polishing. They werent even rusty when I started.