Caribou Gear Tarp

Woodworking Hunt Talkers?

I finally finished my bow rack. I've had this beetle kill pine sitting around in my garage for about 8 years. SO glad to have it up on the wall.

View attachment 242004
View attachment 242005
View attachment 242006

I still have a few pieces of the pine left, but they are smaller so they don't take up too much space. Might try to turn something on the lathe.
I like how you matched the knots on the two vertical pieces. A lot of people wouldn't have taken the time to do that.
 
I like how you matched the knots on the two vertical pieces. A lot of people wouldn't have taken the time to do that.
I nearly messed that up. I was laying them out to mark up the holes for the pegs and it didn't look right, but I couldn't figure out why. I spent a long time trying to figure out what was wrong. I'm glad I didn't just push past the thought and start drilling.
 
I've had this flag since my BIL got back from Afghanistan 10 years or so ago. My dad told me he was making a box for it. Didn't know he was breaking out his tiger maple stash though.

PXL_20220930_233817976.jpg
 
Last edited by a moderator:
Nothing in comparison to what’s happening on this thread but we were putting our house on the market last year and wife really thought that barn doors on the 50 year old built-ins would spruce them up. Problem was they were a weird size and nothing factory would fit. Found a “heavy cabinet” set of hardware that I was able to modify to work and bought a stack of tongue and groove siding with a nickel gap that saved a lot of mill work. I’d do a couple things different if I made them again, but I only had to look at them a couple months and the new owner said it was one of her favorite things about the house along with the original stone fireplace.
 

Attachments

  • E7A8EC3F-8F7D-4EA1-9BF3-C3641E3ED7D0.jpeg
    E7A8EC3F-8F7D-4EA1-9BF3-C3641E3ED7D0.jpeg
    813.6 KB · Views: 20
  • 37ECB7F0-1828-471B-940A-122BD6B7C8A3.jpeg
    37ECB7F0-1828-471B-940A-122BD6B7C8A3.jpeg
    787.6 KB · Views: 19
  • 51AB09B8-DEFD-48DC-B770-0D7A4A4B3F06.jpeg
    51AB09B8-DEFD-48DC-B770-0D7A4A4B3F06.jpeg
    783 KB · Views: 19
The crappy old front door on my little 1929 home was always a wind tunnel. It had fifty coats of paint. No point in stripping it because it never was the right size to start with and had strips cobbled on the edges to make it fit. I priced new steel doors and almost soiled myself. So I made my own door from treated 2x6 and weathered boards stripped from walls of that porch when I remodeled. I used a biscuit jointer router bit and full length strips to join the boards together. I finished installing the screen door yesterday (recycled from the Habitat for Humanity Re-Store) and will finish stripping the interior door today. I'll hopefully get exterior stain on both sides of the outside door before leaving for Montana.20221001_085417.jpg
Puppy is waiting for the black squirrel to make his morning appearance.20221001_144713.jpgAnd there he is! (on the tree)
 
Last edited:
The crappy old front door on my little 1929 home was always a wind tunnel. It had fifty coats of paint. No point in stripping it because it never was the right size to start with and had strips cobbled on the edges to make it fit. I priced new steel doors and almost soiled myself. So I made my own door from treated 2x6 and weathered boards stripped from walls of that porch when I remodeled. I used a biscuit jointer router bit and full length strips to join the boards together. I finished installing the screen door yesterday (recycled from the Habitat for Humanity Re-Store) and will finish stripping the interior door today. I'll hopefully get exterior stain on both sides of the outside door before leaving for Montana.View attachment 242259
Puppy is waiting for the black squirrel to make his morning appearance.
If you can get Man-O-War oil clear coat, about the best you can use for the money.
 

Attachments

  • FB_IMG_1632855771670.jpg
    FB_IMG_1632855771670.jpg
    66 KB · Views: 6
  • FB_IMG_1632855779515.jpg
    FB_IMG_1632855779515.jpg
    63 KB · Views: 6
If you can get Man-O-War oil clear coat, about the best you can use for the money.
Thanks. Selection is very limited in my neck of the woods unfortunately. Of course I want to use the same finish and coats on both sides of the door or it will twist. Gotta be concerned about fumes.
 
Thanks. Selection is very limited in my neck of the woods unfortunately. Of course I want to use the same finish and coats on both sides of the door or it will twist. Gotta be concerned about fumes.
We use M.L.Cambles pre cat for interior.
You might be able to order Man-O-War online.
 
Last edited:
Early Christmas present for the missus. My dad brought this walnut home from his knife company in the early 1990's. It was used for knife handles. It sat upstairs in his garage from the early 90's until 2005 when I drove back across the country to retrieve it. I've been toting it around the west with me (including 3 moves) until I finally stopped threatening to make a table out of it and actually did it.

PXL_20221210_001514849.MP~2.jpgPXL_20221208_021046724.MP~2.jpg
 
Bows and skulls. I'm probably not very good at either but it's fun and keeps me busy
 

Attachments

  • 20220724_142615.jpg
    20220724_142615.jpg
    1.3 MB · Views: 11
  • 20220624_173126.jpg
    20220624_173126.jpg
    1.8 MB · Views: 11
  • 20220826_141306.jpg
    20220826_141306.jpg
    1.4 MB · Views: 11
  • 20220826_141259.jpg
    20220826_141259.jpg
    1.1 MB · Views: 10
  • 20221003_211535.jpg
    20221003_211535.jpg
    1.2 MB · Views: 10
  • 20221003_211502.jpg
    20221003_211502.jpg
    1.1 MB · Views: 9
  • 20221209_210135.jpg
    20221209_210135.jpg
    1.7 MB · Views: 9
  • 20221209_210109.jpg
    20221209_210109.jpg
    1.1 MB · Views: 11
Early Christmas present for the missus. My dad brought this walnut home from his knife company in the early 1990's. It was used for knife handles. It sat upstairs in his garage from the early 90's until 2005 when I drove back across the country to retrieve it. I've been toting it around the west with me (including 3 moves) until I finally stopped threatening to make a table out of it and actually did it.

View attachment 254574View attachment 254575
Gorgeous!
 
I designed and made a daybed with 8 file and storage drawers underneath for my home office. Learned to make locking rabbet joints! Pine slab w/interesting worm tunnels was on the property, and I refinished it for the trim. Took quite a while (2 years), since it was my first, big woodworking project. There will be pillows, many, many pillows.
 

Attachments

  • Daybed.jpg
    Daybed.jpg
    991.6 KB · Views: 14
Gastro Gnome - Eat Better Wherever

Forum statistics

Threads
110,809
Messages
1,935,247
Members
34,887
Latest member
Uncle_Danno
Back
Top