What are you currently reloading?

[Sheltowee]

Batch of 25PRCs loading the 95gr. Hammer HHT on top of H4350 for about 3480fps for an upcoming Alabama rut hunt.

 

[17remhunter]

View attachment 398528
Batch of 25PRCs loading the 95gr. Hammer HHT on top of H4350 for about 3480fps for an upcoming Alabama rut hunt.

 

[Bhoesl]

44 mag. First time loading pistol ammo. 240gr bullet, H110 powder, loaded 6 each from 21 up to 24 grains to try out.

 

[MtsPSU]

.257 weatherby mag for my Remington 700 LSS.
110 accubonds with IMR 4350 Cci primers

 

[Sheltowee]

.223 ladder test with 75gr. ELD-Ms and 77gr. SMKs over Varget.

 

[grizzly63]

45LC, 44 Rem Mag, 25-06 100 gr NBT and Horn RN 117. Bought 14 lbs, Accurate arms 3100 and 8 lbs Accurate arms 8700. Seem to still be good. Great bargain for $40. The 3100 in the 25-06 is moa at 100.

 

[Robert N]

Put up 150 rounds of .44 Special - 240 gr SWC’s over 7.0 of Unique. That’s a fun, easier load to shoot.

 

[Bow buster]

7mm REM mag. 160 accubond. WLRM primers. IMR 4831.
.257 weatherby WLR primers. 120 GR. Partitions. RL 25

 

[Darkside]

300Wm. 175gr Berger, Fed-215
Peterson Long, N-165.
This was my best of 3 series
5 inside of 21/4” 1 flier.
Have 2 weeks before Br season starts.
There is 2 shots where the tape measure shows 2 1/4”.

 

[squirrel_hunter]

280Al Berger 175gr Elite Hunter
410 ga 3 inch 11/16 6's
28 ga 2 3/4 4's
20 ga 2 3/4 4's

 

[Benfromalbuquerque]

280Al Berger 175gr Elite Hunter
410 ga 3 inch 11/16 6's
28 ga 2 3/4 4's
20 ga 2 3/4 4's

What speed are you seeking with that 280AI? I’m presuming it smokes factory 7mm Rem.

 

[Foxtrot1]

Prepping for upcoming safari. 9.3x62 with nosler 286 grain partitions and 7x57 with 175 grain partitions. Both at roughly 2450 fps (20" barrel on 7x57).

 

[squirrel_hunter]

What speed are you seeking with that 280AI? I’m presuming it smokes factory 7mm Rem.

2915 fps

 

[JennySlipper]

Mighty 10 gauge to the tiny 410, love loading shotshells, will some day start loading metallic but not yet.

 

[Benfromalbuquerque]

5.56 only, not recommended you try this in a .223. Reason being it’s over Hodgdon recommended max for .223 by a grain or two and under COAL. However, for those looking to roll their own Federal Fusion at 5.56 level for $0.28… I didn’t observe any pressure signs on brass, YMMV. Work up from a known safe point and send it.

1:7 20”