What are you currently reloading?

[Sheltowee]

Batch of 25PRCs loading the 95gr. Hammer HHT on top of H4350 for about 3480fps for an upcoming Alabama rut hunt.

 

[17remhunter]

View attachment 398528
Batch of 25PRCs loading the 95gr. Hammer HHT on top of H4350 for about 3480fps for an upcoming Alabama rut hunt.

 

[Bhoesl]

44 mag. First time loading pistol ammo. 240gr bullet, H110 powder, loaded 6 each from 21 up to 24 grains to try out.

 

[MtsPSU]

.257 weatherby mag for my Remington 700 LSS.
110 accubonds with IMR 4350 Cci primers

 

[Sheltowee]

.223 ladder test with 75gr. ELD-Ms and 77gr. SMKs over Varget.

 

[grizzly63]

45LC, 44 Rem Mag, 25-06 100 gr NBT and Horn RN 117. Bought 14 lbs, Accurate arms 3100 and 8 lbs Accurate arms 8700. Seem to still be good. Great bargain for $40. The 3100 in the 25-06 is moa at 100.

 

[Robert N]

Put up 150 rounds of .44 Special - 240 gr SWC’s over 7.0 of Unique. That’s a fun, easier load to shoot.

 

[Bow buster]

7mm REM mag. 160 accubond. WLRM primers. IMR 4831.
.257 weatherby WLR primers. 120 GR. Partitions. RL 25

 

[Darkside]

300Wm. 175gr Berger, Fed-215
Peterson Long, N-165.
This was my best of 3 series
5 inside of 21/4” 1 flier.
Have 2 weeks before Br season starts.
There is 2 shots where the tape measure shows 2 1/4”.

 

[squirrel_hunter]

280Al Berger 175gr Elite Hunter
410 ga 3 inch 11/16 6's
28 ga 2 3/4 4's
20 ga 2 3/4 4's

 

[Benfromalbuquerque]

280Al Berger 175gr Elite Hunter
410 ga 3 inch 11/16 6's
28 ga 2 3/4 4's
20 ga 2 3/4 4's

What speed are you seeking with that 280AI? I’m presuming it smokes factory 7mm Rem.

 

[Foxtrot1]

Prepping for upcoming safari. 9.3x62 with nosler 286 grain partitions and 7x57 with 175 grain partitions. Both at roughly 2450 fps (20" barrel on 7x57).

 

[squirrel_hunter]

What speed are you seeking with that 280AI? I’m presuming it smokes factory 7mm Rem.

2915 fps

 

[JennySlipper]

Mighty 10 gauge to the tiny 410, love loading shotshells, will some day start loading metallic but not yet.

 

[Benfromalbuquerque]

5.56 only, not recommended you try this in a .223. Reason being it’s over Hodgdon recommended max for .223 by a grain or two and under COAL. However, for those looking to roll their own Federal Fusion at 5.56 level for $0.28… I didn’t observe any pressure signs on brass, YMMV. Work up from a known safe point and send it.

1:7 20”

 

[3006Sprng]

.243, sierra 90 grain TGK. H4350 @ max charge seems to be good. Grouping under 0.5”. Looks like a completed load.

7mm-08, brand new rifle, loaded up a bunch of Speer hot cors just to run in the rifle and new brass. Moving to Nosler 120 grain BTips. Going to start with ram shot big game. Will see how it goes.

30-06, 168 grain nosler BTips. H4350/ramshot big game, testing both powders.