Time to retire the Buck 110

[Sask hunter]

For hunting outdoor edge replaceable blade. Replaceable blade and has some back bone for popping joints. For trapping something cheap. I use the grinder to sharpen knives for trapping so I’m hard on them

 

[mtmuley]

Replaceable blades are dumb

Funny. mtmuley

 

[Fire_9]

Funny. mtmuley

I guess it’s funny. The more things I can walk into the wood that actually mean something to me, the better. A $20 replaceable blade knife assembled by some Chinese kid is not for me. They’re also a crutch for a lot of people that don’t want to learn the skills needed to properly sharpen a knife. I used to be one of them…

 

[warmer]

What is actually wrong with the knife that would need to replace it?
Just keep sharpening it like Straight Arrow has done. You'll probably wear out before the knife does.

Nothing besides it doesn't seem to hold an edge like it used to. Maybe it's the sharpener?

 

[mtmuley]

I guess it’s funny. The more things I can walk into the wood that actually mean something to me, the better. A $20 replaceable blade knife assembled by some Chinese kid is not for me. They’re also a crutch for a lot of people that don’t want to learn the skills needed to properly sharpen a knife. I used to be one of them…

I get all of that. And can do it. Have a handful of fixed blades handed down. My replaceable has it's place. I don’t want a suppressor. But they aren't dumb. mtmuley

 

[jimh406]

Nothing besides it doesn't seem to hold an edge like it used to. Maybe it's the sharpener?

I doubt it's the steel in the knife. It probably has a lot to do with how it's sharpened.

 

[MTLabrador]

I’m pretty sure Buck will do refinishing on old knives, including adding a whole new blade on folders if you want. I’d do that and keep the cool old knife if it were me.

 

[Fire_9]

I get all of that. And can do it. Have a handful of fixed blades handed down. My replaceable has it's place. I don’t want a suppressor. But they aren't dumb. mtmuley

I understand the comparison but there’s two big differences for me. There’s no direct replacement for a suppressor and a suppressor isn’t bypassing a skill. But I get what you’re trying to say.

 

[2rocky]

I doubt it's the steel in the knife. It probably has a lot to do with how it's sharpened.

Could be a thin feather edge that rolls over. Pocket Steel is your friend....

Someone who is way more into knives than me

 

[TN2shot07]

Buck will put you a new blade in it for about $10 and send it back all polished up. My brother has one of the new ones in a drop point, much stronger tip and improved steel. I have a Benchmade steep country I’m pretty fond of and an argali if you want one of the ultra lights. I still prefer a regular fixed blade to the replaceable blades.

 

[Jack Ryan]

I'd rather have a Buck from the 1980's with 1980' steel in it that about any other knife on the market.

The steel in my Benchmade auto doesn't even come close to holding an edge as well as any Buck I've ever owned.

 

[cgasner1]

For hunting outdoor edge replaceable blade. Replaceable blade and has some back bone for popping joints. For trapping something cheap. I use the grinder to sharpen knives for trapping so I’m hard on them

I had to switch back to havalon. I almost emailed them and told them
How unsatisfied I was with the sharpness of their blades. Last year I actually pre sharpened all the blades before going into the field.