Leupold scopes love or hate em?

I’ve got 2 VX5 and 1 VX Freedom. They’ve been great so far. I have several Nikon scopes and they’ve been excellent. The new VX4 are very interesting to me.
 
My first Leupold was a vx2 2-7. Lived on a 12gauge slug gun, then a .270, now a .22 lr. Never had an issue.
Bought a vx freedom 3-9 that will hold zero for months then shifted 2 inches left. No wind to blame. Did it again a couple months later.
Have a vx6 2-12 that the zero floats a little, seems like it is 3/4 to an inch different every time I take it to the range. But always right around my original zero. The freedom and vx6 both take a couple shots to asjust when I click them.
Vx3 3-10 has never had an issue. Adjusts as soon as I click it, holds zero fine between range sessions.
 
The zero retention/return to zero issues I've seen across VX-2's/3's/5's/6's is such that I couldn't recommend one for anything beyond plinking. The MK5's have a better track record that I've personally observed, not perfect but much better. If I had to use a Leupold it'd be a MK5 3-18 or 5-25, and I'd put it through some paces before I trusted it.
 
The zero retention/return to zero issues I've seen across VX-2's/3's/5's/6's is such that I couldn't recommend one for anything beyond plinking. The MK5's have a better track record that I've personally observed, not perfect but much better. If I had to use a Leupold it'd be a MK5 3-18 or 5-25, and I'd put it through some paces before I trusted it.
I have "plinked" a bit with several VX2's. mtmuley
 
I’ve lost confidence in them and don’t have the time to test them to validate. As such I’m slowly transitioning to Trijicon. I’d love to try a Revic though.
 
I have a few of the vx 3-9. They're light, compact, good eye relief, and when I look thru them the bell/ dark ring around the eyepiece appears to be more narrow than other brands. But I've gone over to FFP and Mrad when I buy. My "nice" scopes are trijicons now.
 
Last thing I want to hear bragged about it the "repair center" or customer service. If I'm buying something like this, I don't want to have to send it in, and deal with any customer service, no matter how good.

The only Leupold I ever owned that had a turret, flat out didn't track or work for using it at all. I didn't send it in for repair. I sold it at a pawn shop and never looked back.

It doesn't look like that was an edge case..

 
I bought an old vx-1 3-9x42 and its been great. Taken a few hits when dropped and still holds zero. The glass was obviously superior to a similarly priced vortex ($200). At least their low end stuff is good.
 
I don't know squat about the Leupold repair center. North of ten Leups in the safe and I've never had a claim.
I have a couple 3x9s w/out turrets that have worked great for longer than I've been alive. Grandpa bought them back in the day and they still kill animals ever year. I'm just not interested in buying one with turrets given the amount of issues I've heard with them, and honestly, they don't have what I'm looking for. I want FFP with 2-3x on the low end up to 15-18 on the high end.
 
My guess is you don’t use a turret. I’ve used a lot of Leopold scopes that work just fine if you set them and leave them alone. If you are dialing all the time - good luck.

A guy I know who used to shoot rifles competitvely, told me that after dialing a Leupold he likes to do several hard finger taps at the turrets joint to ensure things settle into place. I have had no issues with various Leupolds from the 1990s up to present. Last month I put an old glossy VX-I (w 2 MOA click adjustments) on a Winchester featherweight, and it dialed in well.

I have several lower-end Trijicons which are great, though an accupoint is likely going back to the factory for a minor windage turret issue (scope stays zeroed, but turret won't pop out to rotate/re-set).
 

Latest posts

Forum statistics

Threads
120,526
Messages
2,262,603
Members
39,138
Latest member
BigScheib
Back
Top