goldenarrow
New member
- Joined
- May 24, 2016
- Messages
- 16
Hey Guys I'm having a little issue with fliers only with the otherwise tightest groups in am getting.
Riffle is a savage axis in 6.5 creedmore I get about 1.25 moa to 2 moa with factory ammo as well as most loads I have tried during load development with Barnes 127 lrx and reloader 16.
But with 40.5 grains I am giting 2780fps and 15sd and four out of the five shot group into 1/2 moa but their has always been one flyer 2 or 3 moa.
My scope isn't good enough to spot shots so I can't tell when in the string it is coming so it might be barrel heat.
Also the stock is flexible but it is free floated.
Any ideas what could be causing this?
I have ten more loaded up and I plan to only shoot groups of three to minimize barrel heat. If i can get two sub moa three shot groups I will be satisfied for a hunting load.
Riffle is a savage axis in 6.5 creedmore I get about 1.25 moa to 2 moa with factory ammo as well as most loads I have tried during load development with Barnes 127 lrx and reloader 16.
But with 40.5 grains I am giting 2780fps and 15sd and four out of the five shot group into 1/2 moa but their has always been one flyer 2 or 3 moa.
My scope isn't good enough to spot shots so I can't tell when in the string it is coming so it might be barrel heat.
Also the stock is flexible but it is free floated.
Any ideas what could be causing this?
I have ten more loaded up and I plan to only shoot groups of three to minimize barrel heat. If i can get two sub moa three shot groups I will be satisfied for a hunting load.