Woodworking Hunt Talkers?
- Thread starter hansontyrel
- Start date
Redmt
Well-known member
It's drilled and tapped for 5/8-11. I have an 18" stainless all thread that will go into the cross 8" and the rest in a concrete base at his headstone.
Redmt
Well-known member
I was going to just drill and epoxy it but got the idea to see if it would hold tapped threads. The wood is so hard that it cut clean crisp threads.
TheBenHoyle
Well-known member
A while ago, I shot a doe and my wife asked if I could do a Euro mount of the Doe's skull. I assured her that I could and she said that she wanted to have it on display in her high school biology classroom.
I got the skull cleaned, but then I lost sight of the project for a while, partly due to other things going on and partly due to me being nervous about trying to build the glass box.
I decided it was time and I put it all together. It wasn't very hard, but I was nerve wracking. I like how it turned out and I will probably do more things ike this in the future.
On the upside, all of the wood was scrap from other projects I have done in the past.
I got the skull cleaned, but then I lost sight of the project for a while, partly due to other things going on and partly due to me being nervous about trying to build the glass box.
I decided it was time and I put it all together. It wasn't very hard, but I was nerve wracking. I like how it turned out and I will probably do more things ike this in the future.
On the upside, all of the wood was scrap from other projects I have done in the past.
Redmt
Well-known member
My daughter asked me to make her a cutting board. I never made one before but had refinished one that was about 50 years old. This one is black walnut, valley oak, teak, cherry and english walnut. It was all cut out of what was going to be firewood.
TheBenHoyle
Well-known member
Many years ago, my dad told me he was going to have to cut down a tree at the family farm because it was going to block the lane. I wanted a new fireplace mantel, so I asked him to take the trunk to a local sawmill and get a 3"-ish thick beam out of it.
He did a great job and handed it over relatively quickly. I let it dry in my shed for about a decade before I finally flattened it and filled all the cracks and voids. And then it sat on my work bench for 6 months or so before I finally mounted it above the fireplace.
I'm so happy to finally get this done and now I have a workbench that I can see the top of again.
He did a great job and handed it over relatively quickly. I let it dry in my shed for about a decade before I finally flattened it and filled all the cracks and voids. And then it sat on my work bench for 6 months or so before I finally mounted it above the fireplace.
I'm so happy to finally get this done and now I have a workbench that I can see the top of again.
Rack Daniels
Well-known member
Looks great! Those bricks could come back to life and the whole wall will pop!
