What are you currently reloading?

[Mustangs Rule]

Tryin to come up with a 6.5x55 load using 127gr LRX and N560.
Also will be starting load development for 280 AI soon, thinking about the 145gr HHT over H4831.

For decades, the 6.5x55 Swede in a stainless/walnut CRF New Haven made Model 70 Winchester, the 280AI in a Super light, super accurate Kimber Hunter, and a Custom Mauser in 35 Whelen were my Three Musketeers.

I got such incredible accuracy and velocity out of careful handloading.

I sold the 280AI and the 35 Whelen a few years ago, previously I sold my Browning 338, my Winchester SS in 300 win mag and a pre 64 Model 70 30-06 made in 61 or 62. The workmanship got sloppy those last few years.
Now I do all my hunting and shooting with a 270 Standard weight Model 70
made in 1953 and a Sako SS Finnlite Carbine in 308.
For hunting I use Barnes bullets exclusively in both of them. The performance I get is just amazing.

With the 308 Sako Carbine using the Camp Perry Powder made for the 308 i get 2,900'/sec with the Barnes 165 grain TTSXBT and it is a tack driver

 

[Benfromalbuquerque]

Things got a little weird at the range. Not that 17m2 ever looks big, but it’s comical next to my new 33 Nosler from @p_ham. Projectile is some oddball overrun from the Nosler factory store, it’s a 227gr ETip that is similar to, but not the same as, the regular 225 ETip. Performance with a few different projectiles wasn’t quite up to that I was hoping for, so Paul is going to throat it so I can seat the 220 class monos out closer to mag length. He already did an awesome job building the rifle, so it'll be fun to try and take advantage of all the extra room.


View attachment 411238

I see the union of the new Eargesplitten Loudenboomer.

 

[turbobrick]

Just ruining some perfectly fine Peterson SRP 260rem brass and testing a couple new projectiles, 163hht and 138hht in 300wizzum and -06 with RL16.

 

[Sheltowee]

Just ruining some perfectly fine Peterson SRP 260rem brass and testing a couple new projectiles, 163hht and 138hht in 300wizzum and -06 with RL16.

View attachment 411420

What velocity are you getting with the 138?

 

[turbobrick]

What velocity are you getting with the 138?

With this test today, it right at 2950, out of a 20" barrel. I'm out of room with RL16, haven't decided if I'm happy with that or if I'll be trying a different powder. Accuracy was excellent.

 

[Benfromalbuquerque]

With this test today, it right at 2950, out of a 20" barrel. I'm out of room with RL16, haven't decided if I'm happy with that or if I'll be trying a different powder.

Big Game could be the ticket to get you over 3k.

 

[turbobrick]

Big Game could be the ticket to get you over 3k.

I have some Big Game too, just might give it a stab.

 

[turbobrick]

Big Game could be the ticket to get you over 3k.

Big Game ended up being a little slower than RL16 and showed pressure sooner. Think I'm going to back down a little on the RL16 and call it good.

 

[MThuntr]

For my 6mmPRC
Left to right 89gr Hammer HBC, 106gr TAP, 108 ELDM, 116 TMK. Currently shooting 116s at 3110fps out of my 20" Tikka.


280ai 141 Hammer HBC... initial tests are around 3330 fps using Hybrid 100V. It seems to express pressure early so I'm going to try Staball6.5

 

[Jbotto]

Realized I was low on both .357mag and .44mag lately as I’ve gotten back to my revolvers the last few trips to the range. Figured this was as good a time as any to set up my Dillon 550 that has sat in the shelf for a couple years now, after finding a good deal on a used one locally. Pretty cool machine. Got my dies and conversion kit in the mail today so I’ll work on getting it set up through the end of this week. This thing will really smooth out production on revolver rounds from previously using my Co-Ax for it all.