Welcome Nosler Bullets and Ammunition

[brockel]

I bought some in 140 grain for my kids .270. No broken or missing tips and the tips seem to hold tight in the bullets I've tried to knock the tip out of. Probly internet BS, but I read some negatives about the Lubalox coating. I'd buy them again in a heartbeat. mtmuley

Tumbler with some rice removes it

 

[mtmuley]

Tumbler with some rice removes it

Vibratory tumbler work? mtmuley

 

[brockel]

Vibratory tumbler work? mtmuley

That’s what I’ve used

 

[grizzly63]

So whats up with NOSLER ? Are they too busy making limited selection of bullets? Only selling loaded rounds? Labor shortages? A guy begins to give up after a while and move on.

 

[Big Fin]

So whats up with NOSLER ? Are they too busy making limited selection of bullets? Only selling loaded rounds? Labor shortages? A guy begins to give up after a while and move on.

They produce 3x the amount of bullets they were making just 8 years ago. They've invested heavily in new/additional machines, which are running 24/7.

They are always hiring if anyone is interested.

 

[grizzly63]

Thanks for the info.

 

[grizzly63]

By golly, the 180 NBT finally came back. Patience is a virtue and in the meantime I found some other replacements so I should be set. Now to stock up slowly whilst I wait for the Large rifle primers to come back. The first three episodes of shortages didn't bother me because I only loaded 40-60 rounds a year for hunting. Times are different now, more guns, more load development. Thank goodness I don't have that range competition thing going on.

 

[grizzly63]

Nope, wasn't to be. GB had many sellers one day and then poof, they was all gone except for the one that duped me before so I refuse to deal with them again. Keep patiently waiting I guess.

 

[HONEYBADGER]

So whats up with NOSLER ? Are they too busy making limited selection of bullets? Only selling loaded rounds? Labor shortages? A guy begins to give up after a while and move on.

Judging by their reviews on Glassdoor, they likely have a hard time retaining employees.

 

[grizzly63]

They seem to on the market now. This latest purchase was from a trusted vendor and I'm hoping this endeavor is over. I'll keep working on my patience.

 

[JustinsDad]

I have been using factory Nosler ammo on my custom built Nosler 28. 3/8 MOA using 150 grain ETip. My rifle was msde with ridiculous tolerances to spec so half the new rounds I have bought since covid will not feed into my chamber. Head spacing is correct. The radius on the neck of the case is just a little big on some. I’m really happy with the accuracy of the Nosler ammo so I’m not complaining. I also have a 30 Nosler built by Nosler and no issues with it. On the 28, it’s just time to be loading. I have plenty of formed brass now. Anyone else have this issue?

 

[bholt]

Late to the show looks like but I shoot the Winchester Expedition big Game with the Nosler long range accubond in a 6.5 Creedmoor. They have never let me down and since I don't reload theres no reason to change. Great for deer and HAWGS.

 

[17remhunter]

The best and most accurate bullet I have shot out of my 17 Hornet has been the Nosler 20gr Hollow Point. My CZ 527 shoots 5 shot groups at plus or minus .389 unaltered factory Rifle

 

[17remhunter]

I have been using factory Nosler ammo on my custom built Nosler 28. 3/8 MOA using 150 grain ETip. My rifle was msde with ridiculous tolerances to spec so half the new rounds I have bought since covid will not feed into my chamber. Head spacing is correct. The radius on the neck of the case is just a little big on some. I’m really happy with the accuracy of the Nosler ammo so I’m not complaining. I also have a 30 Nosler built by Nosler and no issues with it. On the 28, it’s just time to be loading. I have plenty of formed brass now. Anyone else have this issue?

Ive had similar issues with new 17 Remington Nosler brass they will chamber but the bolt handle wond drop. Im assuming that the shoulders need to be bumped back. I have not had this issue with new Norma brass