Sold! Custom Rem 700 in 300 PRC

[Addicting]

With much hesitation, the rifle I had built for the Veterans hunt, is for sale.

It’s a Rem 700LA trued and mated to a 24” fluted Bartlein #3 1-9 twist. The bolt is black nitrided with a m16 extractor. It comes with a Shrewd muzzle brake and thread cap for it. It is threaded 9/16-24. It has a Timney Hit Trigger and Wyatt’s extended center feed box. The stock is a Kuiu hydro dipped McMillan Game Warden edge fill.

The gun was originally chambered in 300 Sherman and then @Pham switched it over to a 300 PRC for me. I’ve ran 4-500 rounds thru combined. It is a consistent .75MOA shooter. Comes with 50 2x ADG brass and Redding dies. You can’t buy the parts for this price $1500 + shipping to your FFL.

 

[Addicting]

Here are a few targets I could find. Barnes 175g LRX at 3200fps. First is at 200 yards and is 1.3”. Second is 530 yards at 4.5” but the heat waves were bad. It will do better than I can shoot.

 

[Addicting]

Will ship in a hard case and with load data.

 

[noharleyyet]

Badazz pedigree'd offering...

 

[rtraverdavis]

Sweet setup. Wish I were in the market. GLWTS.

 

[winmag]

Nice rifle

 

[Addicting]

Badazz pedigree'd offering...

It would do great in your collection or for your kid’s Christmas.

 

[Dan-06]

Do you still have the Sherman barrel?

 

[Addicting]

Do you still have the Sherman barrel?

It’s the same barrel, P_Ham just rechambered it. I have the dies and RWS brass for a Sherman if you want.

 

[Dan-06]

I’m interested in this

 

[Dan-06]

Can you pm me? I’m too dumb to start it.

 

[brockel]

Very nice rifle

 

[Letthemgrow]

Smokin deal

 

[Addicting]

Very nice rifle

You should see what replaced it! I had P_ham spin me up a 300wsm. Same platform but lighter and shorter as a dedicated suppressor rifle.

 

[brockel]

With much hesitation, the rifle I had built for the Veterans hunt, is for sale.

It’s a Rem 700LA trued and mated to a 24” fluted Bartlein #3 1-9 twist. The bolt is black nitrided with a m16 extractor. It comes with a Shrewd muzzle brake and thread cap for it. It is threaded 9/16-24. It has a Timney Hit Trigger and Wyatt’s extended center feed box. The stock is a Kuiu hydro dipped McMillan Game Warden edge fill.

The gun was originally chambered in 300 Sherman and then @Pham switched it over to a 300 PRC for me. I’ve ran 4-500 rounds thru combined. It is a consistent .75MOA shooter. Comes with 50 2x ADG brass and Redding dies. You can’t buy the parts for this price $1500 + shipping to your FFL.

View attachment 383203View attachment 383204View attachment 383205View attachment 383206View attachment 383207View attachment 383208View attachment 383209

What’s it weigh and what is barrel length just in front of the flutes

 

[Addicting]

Measured from the recoil lug, does not include the threaded part of the chamber.

 

[Potsie]

What’s it weigh and what is barrel length just in front of the flutes

I know a guy that can blend those flutes into a shoulder…

You need this one, Laker.

 

[mtmuley]

I know a guy that can blend those flutes into a shoulder…

You need this one, Laker.

You guys don't like big. 30's. At least not with a proper barrel. mtmuley

 

[Potsie]

You guys don't like big. 30's. At least not with a proper barrel. mtmuley

I still have the one big .30 with a 26” barrel.

 

[mtmuley]

I still have the one big .30 with a 26” barrel.

I know. Just like to poke @brockel sometimes. mtmuley