Short barrel keeper loads??

It is very odd for me to not get an exit with a AB.
I shot a ram with a 160 accubond out of a 7rm at 3050 fps, broadside, no exit. It died yes. But I was unpleased with no exit for a tough bonded bullet. I switched to eldxs. I don't expect an exit with an eldx but more expansion/energy dump with a better BC. The last whitetail i shot at 30 yards with a 162 gr eldx at around 3150 did indeed get an exit hole. Broadside shot.
 
I shot a ram with a 160 accubond out of a 7rm at 3050 fps, broadside, no exit. It died yes. But I was unpleased with no exit for a tough bonded bullet. I switched to eldxs. I don't expect an exit with an eldx but more expansion/energy dump with a better BC. The last whitetail i shot at 30 yards with a 162 gr eldx at around 3150 did indeed get an exit hole. Broadside shot.
What did you gain? Energy dump? Funny. mtmuley
 
I’m not convinced that there are short barrel and long barrel loads that universally shoot tighter in one or the other. Unless comparing a short barrel that used to be longer to how it used to be before the chop, guys are comparing barrel to barrel variances as much as length differences.
 
I’m getting 2850fps and 3000fps out of a 20” barreled 7-08 using 140 grain Accubond/Partitions and 120 grain Nosler ballistic tip(NBTs).
Bring this to the surface. I’m working on a 18” 7-08 for my daughter. Using Big Game I only got to 2720fps. I’ve got Staball 6.5, Varget, and N540 loaded up to test.

What powder got you to 2850?
 
Did you try any other powders? Varget doesn’t case fill at the published Max. Are you over to get to 2800fps?

Don’t have it anymore but I believe 42-43 grains. H4895 isn’t terrible but works better with lighter weights. Ramshot biggame and hunter were good. 7mm-08 isn’t a hard one to find a load for
 

Forum statistics

Threads
117,569
Messages
2,161,083
Members
38,273
Latest member
jwat
Back
Top