Going to craft 6 of these to be completed by late march / early may. $100.00 each +shipping (approx $40) or no shipping charge if pickup / drop off in the Missoula, MT area).
3 are already accounted for so I have 3 available to Hunt Talkers.
The $100 covers cost of materials and misc expense and about $15 to fill my cooler.
If interested PM me or post here.
Link to thread describing the stove for those interested: http://onyourownadventures.com/hunttalk/showthread.php?t=245517
UPS Shipping rate: (ex - Rochester, NY) Where one is being sent...
Note: I recently purchased a sheet metal break/bender... Going to try this on one to see how it works... Will reduce weight of stove if I am able to remove some of the angle iron used for corners / edges. (Will reduce the size by 1.5" - approx) If this works equal or better then current design, I'll contact you to see if your interested - otherwise, expect stove as described in the link provided above.
*Does not include stove pipe / damper
3 are already accounted for so I have 3 available to Hunt Talkers.
The $100 covers cost of materials and misc expense and about $15 to fill my cooler.
If interested PM me or post here.
Link to thread describing the stove for those interested: http://onyourownadventures.com/hunttalk/showthread.php?t=245517
UPS Shipping rate: (ex - Rochester, NY) Where one is being sent...
Note: I recently purchased a sheet metal break/bender... Going to try this on one to see how it works... Will reduce weight of stove if I am able to remove some of the angle iron used for corners / edges. (Will reduce the size by 1.5" - approx) If this works equal or better then current design, I'll contact you to see if your interested - otherwise, expect stove as described in the link provided above.
*Does not include stove pipe / damper
Last edited:
