SAJ-99
Well-known member
I guess my point was it looks like all the other services. In this case I don’t know what year data set it is using because I don’t see it anywhere. The only benefit to this is it’s free.
Ask your onX Hunt questions here!
- Thread starter Big Fin
- Start date
I guess this was my main point.
Maybe I’m dumb but it’s only showing me a handful of Wyoming elk units and lists them all as having 100% draw oddsIn the meanwhile, while you're waiting for onX why not just use PeakOdds. Only three states out there right now for deer, elk, and antelope but it doesn't cost anything---at least not yet.
PeakOdds
peakodds.shinyapps.io
You're not dumb at all....I'm guessing those are probably all the units you can draw with 100% odds as a resident? Try messing around with some of the switches and dials on the left and you will see things change (e.g. as you lower the draw odds since there are more units with lower draw odds esp. in random draw)
WapitiBob
Well-known member
I wasted 2 minutes of my life on that site.
I can look at toprut and see where I should apply in 15 seconds. WY, NM, and AZ have been updated to show '23 odds.
GoHunt is similar
I can look at toprut and see where I should apply in 15 seconds. WY, NM, and AZ have been updated to show '23 odds.
GoHunt is similar
SAJ-99
Well-known member
Both are basically just pivot tables. Makes it easy to cut the data. The user just has to determine how much that is worth to them in $.
When you asked for historical draw odds, is that so you can see a trend and imply how it may look in the next draw?
WapitiBob
Well-known member
Yes, but in an easier and faster format than I have now. I convert the pdf's to spreadsheets, go back a few years and see what past years were like for the hunts I think I can draw. GoHunt has a trend line for that purpose but I need to see the actual applicants in each point pool. Toprut shows those when you click the "more" link next to the "points required".
Pucky Freak
Well-known member
I went to trim a track today, and the app said I couldn’t trim unless I upgraded my account. Any insight here??
Had something similar happened lately. Turned out I wasn’t using the latest update. Updated the app and let me do what I wanted.
onX Hunt
Active member
- Joined
- Jul 22, 2013
- Messages
- 495
Like Jbotto said, first try updating your app if there is an update available. If the issue persists after that, please send an email to our customer support team at [email protected]. That will allow us to dig in a little deeper and get everything up and running for you.
WapitiBob
Well-known member
Missing WY type 6/7 hunts in the research tool.
Pucky Freak
Well-known member
Thanks, I think I was just behind on updates.
My issue that probably doesn't affect many.
I have two accounts. The one I use for work is handy if I notice, for example, livestock that may be in trespass. Easy enough to make a point and forward it to my range specialist. My issue is that I don't want this random pin stuck on my map. I thought I could just delete it after sending, but then it doesn't show up to whomever I sent it to. They have to accept it to their map before I delete it on my end.
I could just send them a lat/long, but that isn't very efficient. Or I could just leave the pin on my map, but I don't want to dilute my important stuff with locations of bad cows.
Anyway this can be resolved? Something I am missing?
I have two accounts. The one I use for work is handy if I notice, for example, livestock that may be in trespass. Easy enough to make a point and forward it to my range specialist. My issue is that I don't want this random pin stuck on my map. I thought I could just delete it after sending, but then it doesn't show up to whomever I sent it to. They have to accept it to their map before I delete it on my end.
I could just send them a lat/long, but that isn't very efficient. Or I could just leave the pin on my map, but I don't want to dilute my important stuff with locations of bad cows.
Anyway this can be resolved? Something I am missing?
WapitiBob
Well-known member
Create a folder for your work stuff, add the pin to work folder, export the pin as gpx, email the gpx to coworker, hide contents of work folder or delete pin.
SilentBirdHunter
Well-known member
- Joined
- Feb 5, 2024
- Messages
- 485
How do you move a waypoint? Edit does not allow me to visually grab and move a wsypoint.
WapitiBob
Well-known member
on phone app, tap waypoint, edit, tap new location
on pc, tap waypoint, edit, drag waypoint to new location
SilentBirdHunter
Well-known member
- Joined
- Feb 5, 2024
- Messages
- 485
Thanks! I was trying Edit, then visually pointing at the waypoint and dragging which did not work.
onX Hunt
Active member
- Joined
- Jul 22, 2013
- Messages
- 495
The best option, for this specific use case, is to either send them the lat-long coordinates so that they can add their own waypoint on their end, or if you send them a waypoint, have them manually add their own right on the same spot so that they still have a waypoint once you delete yours on your account.My issue that probably doesn't affect many.
I have two accounts. The one I use for work is handy if I notice, for example, livestock that may be in trespass. Easy enough to make a point and forward it to my range specialist. My issue is that I don't want this random pin stuck on my map. I thought I could just delete it after sending, but then it doesn't show up to whomever I sent it to. They have to accept it to their map before I delete it on my end.
I could just send them a lat/long, but that isn't very efficient. Or I could just leave the pin on my map, but I don't want to dilute my important stuff with locations of bad cows.
Anyway this can be resolved? Something I am missing?
