270 140gr accubond loads

[bullhead]

I was wondering if anyone has loaded these 140 using either H4831sc or W760 powders? I am using an old Ruger M77 with a 22" barrel and what speeds you getting. Have tried IMR 44831 and RL 15 but there speeds seem to be lower. Thanks for any help. PM me if you want...Tom

 

[bullhead]

I was wondering if anyone has loaded these 140 using either H4831sc or W760 powders? I am using an old Ruger M77 with a 22" barrel and what speeds you getting. Have tried IMR 44831 and RL 15 but there speeds seem to be lower. Thanks for any help. PM me if you want...Tom

Nobody at all?

 

[mtmuley]

Nobody at all?

I load that bullet, but not with any of those powders. mtmuley

 

[Hickory1991]

I have been loading them in my 270 weatherby with imr4350. Also imr7828.

 

[std7mag]

I was wondering if anyone has loaded these 140 using either H4831sc or W760 powders? I am using an old Ruger M77 with a 22" barrel and what speeds you getting. Have tried IMR 44831 and RL 15 but there speeds seem to be lower. Thanks for any help. PM me if you want...Tom

Varget will give you decent accuracy, but the case volume and the burn rate keeps the velocity down.
Ditto the W760.

You're getting closer with the 4831 powders.
Just remember that the 3 different manufacturers burn at different rates.

Myself, I'm running the 140gr Ballistic Tip over a charge of either RL22 or Ramshot MRP.
(Essentially the same)

 

[MTLabrador]

I get 2950 or so with H4831. If you can get some RL22 or 23 they’re great .270 powders. I get 3050 with 140s with RL23 in a 24” barrrel.