22-250 favorite powder

[Redmt]

Does anyone have a favorite powder for 22-250? I'm going to load 62 gr. Barnes. I have a bunch of listed powder for the caliber, but I'll be out of bullets before trying most of them.

 

[mevertsen]

What's the twist of the gun?

Thats a long bullet.

 

[Redmt]

1:10 should handle a 62 gr.

 

[Redmt]

Even if I drop back to 55gr. There's still a bunch of the powders I have on the shelf.

 

[Sask hunter]

I have always used H380. Lots of people like varget. When I was load developing it was tough to find so I never played with it

 

[Redmt]

Varget is one I have a few pounds of along with 4166, H and IMR 4350 Staball 6.5 and a few others that I can't think of at the moment.

 

[88man]

imr 4064 with 55grn

 

[Redmt]

imr 4064 with 55grn

I'll have to check if I have any..

 

[Dan O]

I use H-414 but it has been discontinued. I believe the burn rate is the same as win 760. H-380 has also been good as well as 4064. I'll use up the H-414 but it will take a while I have 10+ pounds.

 

[Bill V]

Staball 6.5 and superformance for top speed.

 

[Mato]

Varget

 

[BuzzH]

H380

 

[D4570]

My 22 250 and 62 gr Varmageddon loves Varget. It is not necessarily fur-friendly, but they're dead!

 

[Redmt]

4064 is out! I thought I had some but thought wrong

 

[tom338]

IMR 4064. Have shot it out of multiple 22-250's. Will hate to see when I run out of it.

 

[EastTNHunter]

4064 and Varget are very similar burn rates. If you have Varget I would start there

 

[88man]

imr 4064 with 55grn

had a good load with imr 4320 >>> 35 years ago

 

[Wyoming270]

I loaded some 60 grain hornady spitzers with blc 2 i had left over from 2019, and I bought some win 760 to try. both shoot well. I like the won 760 because it can be loaded in a lot of calibers including 270 win and 300 win mag.
Ive used magnum primers with both because i only keep one rifle primer around. Works well. I like hornady load data. They know what works with their bullet and publish what gives the best accuracy. They have a downloadable free manual if you do not have the printed version. Im using a 1 in 14 twist m77 from 1999 if it matters.