What are you currently reloading?

[RealMuddyboots]

.270 Win that was renamed .270 Thors Hammer from its performance.
27" Preferred Barrel Light Palma, 700LA trued, 1:8tw, 0.290 freebore, Triggertech.

156HH @3250 with RL26, topped over 3300. Very accurate, farthest kill to date 615ys. Fun rifle to shoot!

I loaded up 60 rounds for a depredation hunt I was invited recently. Thankfully, have 12#'s of RL26!

 

[peterk1234]

.270 Win that was renamed .270 Thors Hammer from its performance.
27" Preferred Barrel Light Palma, 700LA trued, 1:8tw, 0.290 freebore, Triggertech.

156HH @3250 with RL26, topped over 3300. Very accurate, farthest kill to date 615ys. Fun rifle to shoot!

I loaded up 60 rounds for a depredation hunt I was invited recently. Thankfully, have 12#'s of RL26!

So nice to hear that you have plans to shoot at an animal past 615 yards. I'm sure you are a good shot and all, but it kills me that people are proud of doing this, so much so, that they need to post it on the internet.

 

[RealMuddyboots]

So nice to hear that you have plans to shoot at an animal past 615 yards. I'm sure you are a good shot and all, but it kills me that people are proud of doing this, so much so, that they need to post it on the internet.

I build rifles to maximize their performance, the 615yds is actually at my own self imposed maximum distance for a variety of reasons one of which is not the rifle. The internet is a place to share information. You can take it or leave it.

 

[kodiakisland]

Got a week of bitter cold coming up, so I'll probably be doing more loading than shooting.
Working on a good load for my 45 colt with 280gr WFN around 1025fps and a 32H&R load with 130gr SWC that's 925fps from my sp101.
Need to load up some more 6ARC 105gr BTHPs and some 300BLK 220gr subs.
Also told my Dad I'd load a couple hundred 32H&R 98gr WCs for his J-frame. Should be a good time to do that.

Hoping to get out and shoot some instead of just loading.

 

[Mallardsx2]

308,30-06 and 7mm-08 all with nosler hunting ballistic tips today.

Like them red tips!

 

[N2TRKYS]

In the next couple of days I can be found at my drill press loading TSS turkey loads.

 

[nhenry]

I’ll be loading all of my remaining 145gr HHTs in my 280 AI in the next week. Got a good load put together in November and just haven’t ran another bulk batch.

 

[Dan-06]

I’m looking to reload my 6.8 western. I have vihtivouri powder. Any suggestions? I have 550, 165, 555, and 560.

 

[grizzly63]

In the next couple of days I can be found at my drill press loading TSS turkey loads.

You use a drill press to reload?

 

[N2TRKYS]

You use a drill press to reload?

Yes. Some folks use a hand drill, but I went the drill press route. I don’t think I would have liked using a hand drill.

 

[Mallardsx2]

Yes. Some folks use a hand drill, but I went the drill press route. I don’t think I would have liked using a hand drill.

You roll crimping or what are you doing?

 

[N2TRKYS]

You roll crimping or what are you doing?

Roll crimping

 

[Wind Gypsy]

I’m looking to reload my 6.8 western. I have vihtivouri powder. Any suggestions? I have 550, 165, 555, and 560.

What bullet? Any of them could work well with the cartridge. 550 might be a bit on the fast side for heavies.

 

[Dan-06]

I have some 165 grain

 

[Wind Gypsy]

I have some 165 grain

I’d think 165 and 560 would be best of those choices from a burn rate standpoint.

 

[Dan-06]

Perfect, thanks. Ladder test when it warms up some.

 

[Potsie]

Finished off a 100 round set of 6.5x55 the other night, and paid a nauseating chunk of change for a 8 lb jug of H4350 on Sunday.

 

[1100RemingtonMan]

I am loading .300 H&H Mag tomorrow. Sized today and there in tumbler now cleaning the brass tomorrow

 

[turbobrick]

Things are getting a little weird out here.

 

[Elktrack]

Things are getting a little weird out here.

View attachment 361430

Whatcha got there?