Threading a Shotgun Barrel for Choke Tubes

[AlaskaHunter]

Looking for a gunsmith in Kalispell/Polson/Missoula area to
thread a 20 gauge Citori for choke tubes (either invector or invector plus tube)

Any recommendations? Thanks.

 

[matthausarchery]

Would you be open to shipping? I have a gunsmith I highly highly recommend but you would need to ship. I had my Citori back in a week and his prices were much better than any local quotes I received.

 

[mtmuley]

Looking for a gunsmith in Kalispell/Polson/Missoula area to
thread a 20 gauge Citori for choke tubes (either invector or invector plus tube)

Any recommendations? Thanks.

Call Dan Coffin in Victor. 406 642 3058. Not sure how much shotgun work he does, but he is good. mtmuley

 

[std7mag]

If it were me, i'd ship to @p_ham!

 

[p_ham]

If it were me, i'd ship to @p_ham!

Thanks, I'm not set up for doing choke tubes. There's a guy down in TX that does great work. I can't think of his name right now.

 

[morgaj1]

If you are open to shipping, Mike Orlen in NH is a barrelsmith who is top notch. If it is a traditional barrel, I don't believe there is enough meat in the barrel to do Browning or Beretta choke patterns. You will need to do something like a Tru-choke. Mike did an old Beretta for me and did a fantastic job.

 

[Nutrioso]

Briley in Texas has a great reputation. They can install their thinwall chokes in older barrels.

 

[howl]

As we're adding non-MT options, SumToy has done well for me. I send only barrels.

I wouldn't wait. Now through April is a busy season for choke installers if they're known for turkey choke work.

 

[Huntnut60]

Briley in Texas has a great reputation. They can install their thinwall chokes in older barrels.

Briley put some choke tubes in an older Winchester 101 for me 25 years ago. Solid work.

 

[rhytonen]

If you are open to shipping, Mike Orlen in NH is a barrelsmith who is top notch. If it is a traditional barrel, I don't believe there is enough meat in the barrel to do Browning or Beretta choke patterns. You will need to do something like a Tru-choke. Mike did an old Beretta for me and did a fantastic job.

Has Mike moved from Amherst, MA?

 

[morgaj1]

Has Mike moved from Amherst, MA?

I got that wrong. He is in Amherst.

 

[Deleted member 20812]

I got that wrong. He is in Amherst.

I had Mike bore out chokes for me on my side by side. Reasonably priced and very fast turn around.

 

[1100RemingtonMan]

I would not do that as it will devalue it. There are other ways to shoot a tighter pattern and a looser pattern. Just with ammo