Brian in Montana
Well-known member
Not the prettiest picture ever, but I shot this cow with a handloaded 150gn Accubond, about a 270yd shot across a canyon with the .284 Winchester I built in my office. Great hunt these last few days.
NOSLER wants to see your success
- Thread starter Big Fin
- Start date
JustinsDad
Well-known member
I had my old worn out Savage in 7mm changed to 28 Nosler. Remachined the whole rifle. Got down to 3/8 MOA using factory 150 gr etip at 3300 fps. Love this rifle now.
Carl 9.3x62
Well-known member
250 gr Accubond from my 9.3x62. ~2500 fps.
shrapnel
Well-known member
- Joined
- Aug 27, 2015
- Messages
- 2,972
I had Nosler bullets loaded in some ammunition I had in my truck when I shot this deer with a cast bullet in my Sharps…
buffybr
Well-known member
sneakypete
Well-known member
- Joined
- May 19, 2014
- Messages
- 1,980
Nosier 30 06 165 accubond! 33 1/8” 5x5 one shot!
MTGunner
Well-known member
Hem
Well-known member
24' whitetail using 150g Accubond for the first time. 
MTGamecock
Well-known member
This one is from a few years back but I just found this thread.
This cow was taken with a .308 shooting handloaded 180grn Nosler Partitions.
A small herd of cows surprised us in the woods by crossing in front of us at a trot about 40 yards ahead. I took a snap shot on this big cow that stopped to look at us. The bullet took out one of her shoulders. When I quartered her, I found the remains of the bullet (shown in the 2nd picture) lodged against the hide on the backside. It looks to me like the Partition behaved exactly as designed. It went all the way through the shoulder and nearly through the other side, retaining almost 137 grains of its original 180 grain mass. The front portion of lead nearly disintegrated, leaving a small "bubble" of lead that you can see perched on top of the base that remained undisturbed.
This cow was taken with a .308 shooting handloaded 180grn Nosler Partitions.
A small herd of cows surprised us in the woods by crossing in front of us at a trot about 40 yards ahead. I took a snap shot on this big cow that stopped to look at us. The bullet took out one of her shoulders. When I quartered her, I found the remains of the bullet (shown in the 2nd picture) lodged against the hide on the backside. It looks to me like the Partition behaved exactly as designed. It went all the way through the shoulder and nearly through the other side, retaining almost 137 grains of its original 180 grain mass. The front portion of lead nearly disintegrated, leaving a small "bubble" of lead that you can see perched on top of the base that remained undisturbed.
Brian in Montana
Well-known member
Not the hugest mulie ever, but a good meat-buck (our freezers are empty). About 230yds, quartering away with a .284 Win. 150gn Nosler Accubond, always seems to do the trick.
