D
Delw
Guest
Ok guys Those of you who have varmits your trying to get rid of in city limits.IE pigeons,raccoons,crows
Heres a trick I was showed over 18 years ago and have been using it alot on pigeons lately.This is also fun to use in the garage for target practice.
you need a .22 cal center fire .223-220 swift(.17 works well to)
take a (neck size it)casing for the gun you will be using and drill out the primer area so it will hold a shotgun primer(pressfit), befor sticking the primer in take a .22 cal pellet and puch it through the primer hole with a nail. puch it up so its tight with the neck.then push in a shotgun primer.put it in your gun and shoot it. A shotgun primer has enough of a charge to get over 1000 fps and the smaller the case the better. its very accurate.Now you can play a little with some powder but put no more than 1 grain of redot in it and make sure you use cotton to keep the powder close to the primer.
In a bolt rifle this is very quiet more so than a pellet gun and extremly accurate.If I ever get the time I will make some up for those interested.I own a machine shop so i can make them easly.
Delw
Heres a trick I was showed over 18 years ago and have been using it alot on pigeons lately.This is also fun to use in the garage for target practice.
you need a .22 cal center fire .223-220 swift(.17 works well to)
take a (neck size it)casing for the gun you will be using and drill out the primer area so it will hold a shotgun primer(pressfit), befor sticking the primer in take a .22 cal pellet and puch it through the primer hole with a nail. puch it up so its tight with the neck.then push in a shotgun primer.put it in your gun and shoot it. A shotgun primer has enough of a charge to get over 1000 fps and the smaller the case the better. its very accurate.Now you can play a little with some powder but put no more than 1 grain of redot in it and make sure you use cotton to keep the powder close to the primer.
In a bolt rifle this is very quiet more so than a pellet gun and extremly accurate.If I ever get the time I will make some up for those interested.I own a machine shop so i can make them easly.
Delw