Man, so sorry! I feel your pain-
Broken Euro
- Thread starter Rack Daniels
- Start date
Mallardsx2
Well-known member
- Joined
- Apr 4, 2015
- Messages
- 3,341
Are all of those in your kitchen all of the time?I am delegated to having all skulls and “dead” things to the shop/garage… as per the Mrs. Full stop!
Ya. Hell, my wife killed half of those...she aint putting her heads in my smelly shop. lol
Rack Daniels
Well-known member
@TOGIE I’ll post some photos tonight. It is this cheap one-piece metal deal that just has a finger that sticks out into the hole on the back of the skull. That chinsey metal finger bent just enough that it slid off. It’s actually happened once before but it was my fault. Glued and repaired, bent the finger back up, and right then I should have known the integrity of that little finger was toast.
2rocky
Well-known member
Brute
Well-known member
If you go with the mount base. Order one that will fit your needs. They will screw threw the skull to the base. Then use molding clay to fill in and smooth out. Generally use felt or flannel or what ever you like. Stretch tight and trim around antler bases.Generally put the tag on the back of the plaque also.
rmi-online.com
rmi-online.com
Who we are
Research Mannikins Taxidermy Supply has over 40 years in the taxidermy supply industry. Striving to bring you high quality supplies.
rmi-online.com
Antler Mount Base | Research Mannikins Taxidermy Supply
Antler Mount Base | Research Mannikins Taxidermy Supply At Research Mannikins we pride ourselves on our unparalleled customer service. We strive to give our customers personal attention and service, and our motto is "We are your hometown taxidermy supply store."
rmi-online.com
Last edited:
I used to go cheap and do the same thing until I finally tried one of these. Well worth it!
Skull Hooker Flush Mount
Powder-coated steel mount<br>Specialized prong system supports trophy naturally<br>Uses holes and crevasses in skull<br>Mounts bear, deer, &
www.scheels.com
RealMuddyboots
Well-known member
- Joined
- Dec 28, 2021
- Messages
- 918
Bought a bunch off Camofire before feet went up.I used to go cheap and do the same thing until I finally tried one of these. Well worth it!
Skull Hooker Flush Mount
Powder-coated steel mount<br>Specialized prong system supports trophy naturally<br>Uses holes and crevasses in skull<br>Mounts bear, deer, &
Hem
Well-known member
I just ordered some skull hangers by Grakksaw. $15 per.
Carl 9.3x62
Well-known member
I've made a few plaque mounts, where you screw and bondo the skull cap to a small piece of plywood that, more or less tear drop/heart shaped, then use paper mache to build a mold/form around it, similar to what Brute posted above. Then stretch a piece of leather around it and screw it to a nice oak plaque. Glue black lace bordering around the antler bases and the base or the mache form. I'll try to post some pics later of what they look like.
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 4,966
I had one get blown up when it hit the deck while my wife was dusting it. Took it out to tru life in laurel they fixed it up nice. If you want a good guys number in Billings let me know
Rack Daniels
Well-known member
Man if I could do my own full scale shoulder mounts, I would never pay a taxidermist or a processor again. I’ve only paid one in my life and I really try to do everything myself. Mostly because of cost but also because I like to call myself a jack-of-all, you know… I think I’m going to try the cement/plaster mix and stretch some leather or something over it. If it comes out like shit I’ll definitely be getting a phone number for someone from you….
cgasner1
Well-known member
- Joined
- Apr 24, 2016
- Messages
- 4,966
If it was me at this point I’d probably buy a skull for shed horns and have it my horns pinned onto it. Maybe someone around here picks up a dead head they would cut the horns off for you and have a taxi pin it to a real skull
Similar threads
