Threading and chopping a barrel?

[brockel]

That’s what I’m thinking. Only 4k PSI max difference between the two. Load a slightly faster burning powder in the 7-08 and they’d probably be close enough that no cervid would tell the difference.

There would definitely be a velocity difference. Just not enough to matter with the right bullet

 

[kiwi hunter]

i brought a 300wsm for a reason, its a 200 meteres better 308. mine has a 26 inch pipe, a lightweight muzzle break that is aluminium and weights nothing.
hunting tahr on the east side in a howling norwester gives you a certain advantage with the extra speed, i believe wyoming and montana have similar conditions.
losing 20 to 30 kg off the waist would be the easiest option.

 

[Dakotakid]

Gun is 300wsm r700 with sporter barrel. Took it to smith to thread barrel for a can. Will need a shoulder/collar according to the gun smith. Question is for those that have chopped a barrel what are pros and cons. Can length is 6”.

I have taken a handful of elk with a 7mm-08 great cartridge but that discussion is too removed from the original post asking for pro and con of chopping a barrel.

If you elect not to chop a barrel, great.

 

[golfer]

It’s been chopped, worse comes to worse at least barrel makers will still be making replacement barrels

 

[std7mag]

It’s been chopped, worse comes to worse at least barrel makers will still be making replacement barrels

Let us know how that new 24" Pac-Nor polygonal works!

 

[Dakotakid]

It’s been chopped, worse comes to worse at least barrel makers will still be making replacement barrels

What bullet are you going to try?
What bullet are you shooting now?

 

[golfer]

What bullet are you going to try?
What bullet are you shooting now?

Was shooting 180 accubond. Will see if I can shoot them after chopping. If not I’ll try 165 accubond or ttsx

 

[Dakotakid]

Was shooting 180 accubond. Will see if I can shoot them after chopping. If not I’ll try 165 accubond or ttsx

I have been shooting the 175 lrx but let us know what you get with the 18”.

 

[golfer]

I have been shooting the 175 lrx but let us know what you get with the 18”.

Went out and shot. Looks like I maybe able to use same load. Pre chop velocity was 3027 post chop 2879.

 

[SCW]

Cut a tikka 300 wsm to 18”. No collar but use a um 1/2 to 5/8” adapter. I’m also using an OG can from them that only adds 4” to length. 4” goes over barrel. Love how it handles. Haven’t checked velocity yet.

 

[Burn Pile]

I'd like to see some of these 20" velocities. My 20" tikka prefit has arrived to go shorter, lighter, and twistier. I'm at 3070fps with barnes 175lrxs with the factory 24" thats staying on for my tags next week.

 

[Forkyfinder]

300 wsm and you lost about 150 fps going 24 to 18"

Almost worth that just for a handier rifle.

 

[golfer]

I'd like to see some of these 20" velocities. My 20" tikka prefit has arrived to go shorter, lighter, and twistier. I'm at 3070fps with barnes 175lrxs with the factory 24" thats staying on for my tags next week.

Went from 24” to 20” data as listed :
Pre chop velocity was 3027 post chop 2879.