New bullet coming from Hammer. mtmuleyThey are going a little over 3800 fps with H4831sc. My last reading with Retumbo was over 3950 and I went up in charge weight from there but my chrono didn’t pick them up. The groups with Retumbo weren’t what the rifle was capable of so I “settled” for the nearly sloth-like H4831sc load.
BTW - using a light for caliber bullet is a good recoil reducer. 200 gr Accubonds were pretty punishing in this rifle.
200 grain Accubonds at 3200 punish elk too. mtmuleyThey are going a little over 3800 fps with H4831sc. My last reading with Retumbo was over 3950 and I went up in charge weight from there but my chrono didn’t pick them up. The groups with Retumbo weren’t what the rifle was capable of so I “settled” for the nearly sloth-like H4831sc load.
BTW - using a light for caliber bullet is a good recoil reducer. 200 gr Accubonds were pretty punishing in this rifle.
BAKPAKR
Well-known member
Cup and core?
Higher BC. Because it sells bullets. mtmuleyCup and core?
Potsie
Well-known member
Those AHT should sell like hot cakes too.
Hammer is doing well. mtmuley
noharleyyet
Well-known member
Tipped Absolute ?
Potsie
Well-known member
Yes sir. They’re making a 105 gr AHT in .264 caliber.
Now that you mention it, the hexagon barrel .338-06 he did trips a few triggers for me!
Southern Elk
Well-known member
I’ve always wanted a BLR. I would also like to have one of the Browning .22 automatics that you load from the stock.
jwatts
Well-known member
Back in the early 2000s my dream rifle was a Remington 700, 24in fluted stainless barrel somewhere between a Sendero and a magnum sporter profile chambered in 25-06, mounted in an HS Precision stock. I had it built, and enjoyed it for about a year. That was until I discovered my next dream rifle. I traded it on a Ruger Redhawk 44 mag and a Remington 673 in 300SAUM (my new dream rifle). I still own that one. But later on down the road I decided my dream rifle was a 280AI in the factory Remington 700 titanium Bell and Carlson stock. It happened that my 280 mountain rifle was due for a barrel, so I built my newest dream rifle off of that platform. I used it to take my dall sheep. In between all that I had other dream rifles. I wanted several, and bought or built most of them, and sold a majority those as well. A quick glance at my safe showed me a glaring hole the other day. I don't have a proper wood stocked, blued action, bolt gun. I'm currently looking at buying or building one close to my previous 25-06, but blued and in a wood stock. Dreams change, but that won't stop me from trying to buy those dream guns just to see if they are all I make them out to be.
Edit: Another dream is a 338-06 bolt gun. I shot one several years back that a buddy has, and it has yet to leave my mind,
Edit: Another dream is a 338-06 bolt gun. I shot one several years back that a buddy has, and it has yet to leave my mind,
Islander
Well-known member
I love my Barrett Fieldcraft in 6.5 Creedmoor. A little light at 6 lb 13 oz with fixed 6X scope and full magazine. Excellent stock. Maintenance free stainless. Tons of excellent factory ammo. My goto for literally everything in North America.
Darkside
Active member
You can get over 4000fps by using H4350. Been there done that.They are going a little over 3800 fps with H4831sc. My last reading with Retumbo was over 3950 and I went up in charge weight from there but my chrono didn’t pick them up. The groups with Retumbo weren’t what the rifle was capable of so I “settled” for the nearly sloth-like H4831sc load.
BTW - using a light for caliber bullet is a good recoil reducer. 200 gr Accubonds were pretty punishing in this rifle.
My Dream Gun would be a
Lewis 1914.
Don Fischer
Well-known member
- Joined
- Jun 27, 2017
- Messages
- 3,183
Not so sure the year, long time ago. maybe about 1975?
D
Deleted member 16864
Guest
Hmmmm, familiar looking rifle made in 1938, has a hand-made 2 1/2 power scope in a side mount that cost more than the rifle, a case of silver tipped magnum 180 grain ammo from the 1950's, what's not to love?
BAKPAKR
Well-known member
A guy on another forum told me the same thing. At the time, I was saving what H4350 I had for my 6.5 (gasp) Creedmoor. Since that powder has become more readily available and I have upgraded my chrono to a Garmin, I am going to try to pass the 4000 fps mark.
Caseknife
Well-known member
The one that I will always miss, had the chance to buy it for $350, but was a starving college student, Rem 700 Classic in 35 Whelen. Borrowed it from my cousin one fall to kill a spike bull elk. He offered to it me, but I didn't have the money at the time.
Have my father's 1937 Model 70 '06, has seen a lot of bad weather and killed probably 120 head of game. Needs a little work to bring it back to looking good.
Have my father's 1937 Model 70 '06, has seen a lot of bad weather and killed probably 120 head of game. Needs a little work to bring it back to looking good.
Redmt
Well-known member
How many grains are you using to hit 4000 fps?
GlockZ
Well-known member
Probably a Sako 90 Quest would be my dream rifle
