Removing the factory muzzle brake from a Savage Model 11 Long Range Hunter

[TradeGun.62]

Anybody take the muzzle brake off of one of these? If so, how hard is it?

Mine is stuck in the open position and it's not really needed my this rifle so I'd like to take it off.

 

[cowboy]

Same thing on my sons. Had to have a smith cut it off and recrowned.

 

[TradeGun.62]

Thanks cowboy. I was worried that might be the case.

 

[Brad W]

I had a tough time getting mine off as well but managed to do it. It is definitely affixed with something like Loctite. I inserted an Allen key across the diameter and that gave me enough torque to get it off

 

[Brad W]

You will see the white residue on the threads when you get it off

 

[Bigjay73]

Heat it with a mapp torch first

 

[cowboy]

Thanks cowboy. I was worried that might be the case.

The reason we cut it off rather than try to salvage it was the fact the dadgum thing wouldn’t stay in one place when it was working. Shoot a round and it’d vibrate the opposite of its setting. Quite frankly it was a PIA so we just eliminated the problem.
It shoots more consistent cut off than it did when it had the brake on.