44hunter45
Well-known member
Settled on my final loads today. 3500fps out of my 1-9 24" tube and 1/2 MOA.
Gonna suck when I run out of RL-26.
I have enough to make about 20-30 rounds and then its gone.
Since this is all the powder I've got for now, I'll go the next step and weigh out my brass. I'll select 20-30 as close as possible in weight.
I went a lot heavier on the crimps for these due to the fouling issue I had in my 7mm. (It shot 3/4 MOA today with 131 HH)
I'm hoping a higher start pressure will get me a more complete burn.
Gonna suck when I run out of RL-26.
I have enough to make about 20-30 rounds and then its gone.
Since this is all the powder I've got for now, I'll go the next step and weigh out my brass. I'll select 20-30 as close as possible in weight.
I went a lot heavier on the crimps for these due to the fouling issue I had in my 7mm. (It shot 3/4 MOA today with 131 HH)
I'm hoping a higher start pressure will get me a more complete burn.
Last edited:
