Barnes seating depth and tuning different weight bullets

COElkChaser

Member
Joined
Oct 8, 2019
Messages
58
I've been working up a load with 168 gr TTSX in my 30-06. I found that my rifle likes a big jump to the lands - with 54gr of H4350 I can see groups go 2.25" @ .050" off the lands, 1.10" @ .100" off, and 0.55" @.150" off the lands. I've repeated the performance of the .150"

54gr H4350, 0.150" off the lands
IMG_20200505_132924.jpgIMG_20200620_132323.jpgIMG_20200620_133935.jpg

Before I had this info, I loaded some 130 gr TTSX using the Barnes recommended 0.050" off the lands, varying Big Game powder from 59.0 to 62 gr.

What would you all do - Seat the bullets deeper to a depth .150" off the lands? Or shoot what I have and then dial in the best performing group for seating depth?

Put another way - Would you expect different weight bullets (of the same brand and model) to perform best at the same seating depth? Or are they independent?
 
I always like to start close and work away from the lands. The norm has always been to tune the powder charge and then the seating depth but I think you’re starting to see more guys do it the other way. Start with a moderate load and find a good seating depth first and then find the right charge
 
I would run the same seating depth test on the 130 if you want to use it, otherwise you won't be able to isolate the variable.
 

Forum statistics

Threads
110,808
Messages
1,935,219
Members
34,887
Latest member
Uncle_Danno
Back
Top