Wind Gypsy's latest activity
-
WWind Gypsy replied to the thread 280 AI help.Oh man, the Berger applied ballistics long range! Sounds like a bitchin bullet! That’s enough AI slop to make the rest of it questionable.
-
WWind Gypsy replied to the thread Tis the Season! (For the annual new cartridge....)."Finicky" is just a reference to overbore cartridges in general from hornady. Highly doubt the slightly more overbore 257 RPM is going...
-
WWind Gypsy replied to the thread Tis the Season! (For the annual new cartridge....).72 grain h20 capacity 257 RPM. Basically equal to what a 257 SAUM would be. A hair larger than a 257-280AI but in a shorter fatter...
-
WWind Gypsy replied to the thread Tis the Season! (For the annual new cartridge....).25 creedmoor plus 250 fps. It’s actually about the most obvious gap in a market without gaps. Not a single saami cartridge out there...
-
W26 peaked out and it was like I was just making the fireball bigger. I don’t think 160 was heavy enough to get a complete burn. 23...
-
WWind Gypsy replied to the thread 280 AI help.That surprises me a bit that 23 was faster than 26. You worked up to pressure signs in both? Good info though. I haven't dabbled in...
-
WWind Gypsy replied to the thread 280 AI help.I'd expect RL17 and RL23 to get you better velocities than H4350. RL26 (good luck finding it) and N560 would be good velocity powders...
-
WNo experience with 280 AI so take this all with a grain of salt. I would look at reloading manuals/published loads that will produce...
-
WYes, for the most part with the 168gr. You’d hit your goal with 140s.
-
WWind Gypsy replied to the thread Copper barrel cleaning.I've shot limited copper bullets so dont have enough background to say one way or another. That said, i dont understand why it'd be...
-
WWind Gypsy replied to the thread Round In The Chamber.How would you go about closing a bolt on a round without having the firing pin cocked? Is the firing pin not protruding from the bolt...
-
WWind Gypsy replied to the thread Tikka 308 18" barrel puzzle.Sounds like there might be recoil lug seating issues? Make sure your front scope screws aren't getting into the barrel. I've heard of...
-
WNo Canada or US in finals is a huge surprise, but the amount of talent on all these teams is incredible.
-
WWind Gypsy replied to the thread FCS championship!#?.Piss, i thought it was tonight for some reason and missed it. Glad the Cats won, they were due.
-
WThink everybody missed that the OP went off the deep end and got a thermal scope for his truck gun! So much for the budget on that one:)
