What caliber/rifle/bullet would be suitable for taking a Terminator/iRobot?

[Big Sky Guy]

In the spirit of @3006Sprng TRex thread, curious what everyone would consider to be robomane and effective in neutralizing the coming AI threat of humanoid robots? Is it caliber specific or bullet alloy specific or maybe will need a certain minimum velocity??

60 minute segment on China’s humanoid robot force and a lifetime of these type of movies have me thinking.

Plus, we always need an excuse for a new rifle / more ammo.

I’ve got some of that 5.56 Lake City Green Tip steel penetrator ammo laying around. Prly just start with that? Did they make 7.62 green tip?

 

[Forkyfinder]

556 / 223 Incendiary | Gum Gully Provision

The Gum Gully 556 / 223 Incendiary Ammunition is an incendiary round that ignites upon target contact with a sufficiently rigid target. Sold in 6 Round Packs.

gumgully.com

308 INCENDIARY

308 Incendiary Custom 308 Incendiary Ammo. This ammo comes in a 20 round box and a 6 pack. These bullets produce a bright flash with sparks when striking a hard surface. Manufactured in the U.S.A.!! Dealer Inquiry for this product: Contact us at [email protected]. Make sure to read...

hickoryflatboars.com

My conclusions based off pondering the same

 

[Big Sky Guy]

556 / 223 Incendiary | Gum Gully Provision

The Gum Gully 556 / 223 Incendiary Ammunition is an incendiary round that ignites upon target contact with a sufficiently rigid target. Sold in 6 Round Packs.

gumgully.com

308 INCENDIARY

308 Incendiary Custom 308 Incendiary Ammo. This ammo comes in a 20 round box and a 6 pack. These bullets produce a bright flash with sparks when striking a hard surface. Manufactured in the U.S.A.!! Dealer Inquiry for this product: Contact us at [email protected]. Make sure to read...

hickoryflatboars.com

My conclusions based off pondering the same

Thank you, forgot about the incendiary rounds. These are different than tracers correct?

 

[3006Sprng]

3006, 150 grain fmj doing 3000 fps. Any bolt gun.

If the roomba in my house ever gets any funny ideas, I’ll be sure to test this combo out.

 

[Boarmaster]

One that can shoot from a long ways….

 

[Nick87]

Are the robots made in China? ...22lr.

 

[338Sh00ter]

If the robots are from Temu, a water pistol ought to suffice

 

[D4570]

OK, I have just the set up.
I have a Rem 700 24" barrel, Leopold dial-up 4x12 scope, Hammer 200 gr bullets, 8mm Rem Mag, and it also has a "Dead Mule" in the stock. This monster spits out fire and bullets at 3220 fps. Make a very good 5-inch group at 500 yards. I have never checked on penetration on steel, but it will go through 7 milk jugs filled with water, at 100. It may go through more, but my stand only holds 7 jugs.