Boat motor repair kit, wanting input

My list of stuff I keep in the boat is pretty substantial and almost all has been added to the kit based on experience, unfortunately.

-Small Hammer
-Metric Wrenches
-Standard Wrenches
-Metric and Standard Sockets
- 1/4" and 3/8" drive ratchets
-1/4" and 3/8" extensions AND swivels
-Side cutters
-Needle nosed pliars
-Crescent wrench (Small and large)
-Vise grips.
-Small metal clamp.
-Assorted bolts and washers and nylock nuts. (Various sizes and lengths)
-Extra Prop
-Prop Wrench
-Extra Prop nut
-10 feet of pull cord rope
-Extra primer bulb
-Gas line fittings
-Hose Clamps
-2 of EVERY FUSE FOR EVERTYTHING ON THE BOAT
-Multimeter (THIS IS SO FREAKING IMPORTANT.....)
-Wire Strippers
- 20 feet of #14 wire.
- 2 rolls of electrical tape
-Shrink tube
-Windproof lighter for shrink tube
-Screwdrivers
-Allen Wrenches
-Zip Ties
-Duck Tape
-Quart of lower unit gear oil.
-Gear oil pump
- Tube of UNOPENED JB Weld.
-2 Tubes of Superglue
-Quart of motor oil
-6 feet of Fuel line hose
- A sharp knife and 3 chunks of 1" dowel rod 6" long (Plugging big holes).
-Extra boat plugs.
-50 feet of rope.
-Spare Leatherman

I know this is a lot but I have literally used Ever since thing above at some point or another and it has saved my a$$. None of the stuff above leaves my boat. EVER.
This. This is what keeps me from buying a boat lol
 

Latest posts

Forum statistics

Threads
119,627
Messages
2,232,277
Members
38,945
Latest member
jacobhunter
Back
Top