-
Lever Monday...post em up
Not a great photo, but proof it does, in fact, come apart. -
A metalsmith re-stocks a No.1
Throwing this in here too cause I don't feel like starting a new thread. No. 3 chambered in 22 Hornet. -
Mountain Rifle Caliber? Ya- I know...
Maybe so. Everyone I know doing retail said this whole year has been slow. Custom work is still thriving. I just let people tell me what they want instead. -
Lever Monday...post em up
Winchester Model 71, converted to a takedown. Chambered in 450 Alaskan. -
Mountain Rifle Caliber? Ya- I know...
It was a 7mm-08, I don't really remember any of the specs on it. It took a long time to sell so I didn't do any more. -
Hello, Regarding your muzzle threads, Text or email is the best way to contact me. (775)...
Hello, Regarding your muzzle threads, Text or email is the best way to contact me. (775) 294-5300 [email protected] Reach out an we can go over options. Thanks, Paul.- p_ham
- Profile post
-
To Flute or not to Flute?
We're using an X-Caliber barrel, which they're fluting. I've had extremely good performance with their barrels. -
Pedersoli Hawken Peep Sight Mounting & Compatibility
Drill and tap a hole perpendicular to the windage screw that would allow a set screw to be tightened against the diopter body. You can line up the new hole with the 0 on the windage scale, but come from the backside if there is enough material there.- p_ham
- Post #2
- Forum: Muzzleloaders
-
Shipping firearms via USPS
I usually have clients screenshot the usps regs on their phone just in case they run into problems during drop off. -
Ladder test interpretation
How many shots on the barrel? Virgin brass or fire formed?- p_ham
- Post #19
- Forum: Ammunition and Reloading
-
Winchester 1886 50-100-450
Funny story, that was a real phone number here. I think it's disconnected now. -
45-70 .457 Conversion
It's just a 45-70 with a case length of 2.21, and an oal of 2.66. It's still .458 cal. -
Suppressor help
1/2-28 is fine for 7mm. Some suppressor manufacturers site possible side load weakness if the rifle is dropped on the suppressor, on the smaller wall thickness for their reason to recommend larger threads. -
45-70 .457 Conversion
I personally don't think it's worth the effort. Ballistic gains are marginal if any, and shotshells out of a rifled barrel are very short range. -
Barrel length and suppressors
You'll need 7/16-28 unless you have a collar added on for 1/2-28. Rule of thumb is .1" over thread diameter for a shoulder.- p_ham
- Post #17
- Forum: Fireside (A Place for Friends)
-
Model 12 slide release sticking
It could be a worn sear, trigger pin, hammer pin, or broken/bent spring on the slide release. Also check the tip of the hook and hammer abutment for any burrs. The hook on the slide release is intended to pull the hammer back off the sear when racking the slide to prevent slam fires. -
-
New rifle, barrel, or cut and thread existing
That works! I'll keep doing it my way though. I'm not going to rely on loctite alone, without at least some kind to shoulder for the collar to register against. Also, the way I do the permanent adapters, there's no tolerance stacking either. -
New rifle, barrel, or cut and thread existing
For a collar with no adapter, I need an O.D. of .65" or greater. A standard Tikka barrel is .62" at 24". You probably have smaller threads on the barrel itself, judging by the length, probably 9/16-24, and 5/8-24 threads on the end of your adapter.
