AIM STR8's latest activity
-
AIM STR8 replied to the thread Scope Ring Honing.The Wheeler lapping rod/bar measures out to be .003" undersize (1" nom.) I used the 220 grit that came with it. -
AIM STR8 posted the thread Factory Ammo for .270 Win. with 1:10 barrel Twist in Ammunition and Reloading.Could someone tell me if there is any correlation to muzzle velocity and barrel twist? In other words if my .270 has 1:10 twist would it...
-
I lap just the bottom/ base rings and NOT the tops...I lap them lightly with clover 400 and torque with a proto dial type wrench...no...
-
AIM STR8 replied to the thread Scope Ring Honing.The Burris rings came with some "friction paper" that measures out to just under .005" .... maybe that would help you out?
-
-
ive got that same wheeler scope honing setup and think its a good idea so it doesnt bind the scope in any ways,,ive never had issues,,im...
-
AIM STR8 replied to the thread Ruger 77 Tang Safety - action screws torque setting?.Sorry if I sounded condescending .... The recommended torque value for a 1/4-28 (lug screw) is typically 75-99 inch-pounds (lbs-in). I...
-
I think you're fine. I lapped more than that off a set of rings and everything worked fine. The rifle sighted in with no problem, and...
-
AIM STR8 replied to the thread Scope Ring Honing.I don't recall exactly, I couldn't find any pics that I took
-
AIM STR8 replied to the thread Scope Ring Honing.I used those on another rifle of mine and took very little to clean them up.
-
I doubt you would lose much, maybe a 1/4 minute or couple of tenths out of the adjustment range even if it was now off the same axis...
-
AIM STR8 replied to the thread Scope Ring Honing.Thank you sir, That is the kind of answer I was looking for !
-
AIM STR8 replied to the thread Scope Ring Honing.Lets be fair .... you were the one that moved the conversation to "lapping". All I was asking is for those that have "lapped" in any...
-
AIM STR8 replied to the thread Scope Ring Honing.Lapping can increase the amount of surface contact between the ring and scope tube, and also help with proper alignment between the...
-
AIM STR8 replied to the thread Scope Ring Honing.Same concern you would have to glass bed the action .... free float the barrel, etc.
-
