Resizing a few 308 Winchester brass to 7mm08. Will have to trim to length when done. Got 1000s of 308 brass ,good place to use it up. Just have to keep them separated from my other 308 ammo but that's not a problem. I black out the head stamp anyway .
resizing 308 brass to 7mm08
- Thread starter Rooster52
- Start date
sbhooper
Well-known member
They will probably need trimming, Rooster, and I would turn the necks, also. Turning probably isn't necessary, but that is what I would do just to make sure everything is uniform.
Just check the length with a caliper and it will tell you for sure.
Just check the length with a caliper and it will tell you for sure.
MThuntr
Well-known member
Don't forget the lube...look online for a recipe of liquid lanolin and 100% alcohol for a cheap spray lube
Thanks.
I will trim to length but will check it in the chamber for neck thickness.
