Blackhorn 209 issues.

45cal

Member
Joined
Oct 14, 2020
Messages
73
Location
Mid Michigan
I have some earlier BH-209 produced in 2019 by Western Powder Co. I first used it with their BH-209 breech plug and 209 primers in my CVA Optima V2. I would run a clean patch from breech to muzzle after every shot. I did this because every time I shot it, there would be a black tar like residue left in the barrel. I thought it might be an ignition issue so I switched to using the reworked BH-209 breech plug with Vari-Flame modules and Federal Large Rifle Magnum Match primers. That didn't make any difference at all.
Has anyone here seen or heard of anyone else having this issue while shooting BH-209 powder?
 
Last edited:
You don't need to swab with BH209. Blackhorn still fouls; even smokeless powder fouls a barrel.
 
Is it plastic from the sabot? Also you don't need to swab after every shot. I have shot a rifle with it like 20 times in a single session without cleaning and didn't have any issue
 
Any chance you have extra oil in the barrel?
I thoroughly cleaned the barrel, breech threads and the breech plug. I put thread tape on the breech plug to replace the anti seize to see if that makes any difference. Just waiting for a nice day to shoot and chronograph some loads.
 
Last edited:
After going to the range today, I found out that even with a small amount of anti seize on the breech plug previously, it was contaminating the BH-209 powder. I thankfully found what was making the tar like substance in my bore. Even without the anti seize the barrel was dirtier than I thought it should be, but I can live with that.
 
After going to the range today, I found out that even with a small amount of anti seize on the breech plug previously, it was contaminating the BH-209 powder. I thankfully found what was making the tar like substance in my bore. Even without the anti seize the barrel was dirtier than I thought it should be, but I can live with that.
Hm, that’s weird
 

Forum statistics

Threads
118,699
Messages
2,203,341
Members
38,624
Latest member
WINCRAFT
Back
Top