std7mag's latest activity
-
Sstd7mag replied to the thread Ready for a new 7 mag load.I picked up Norma brass for my 257 WBY. Holding up good so far. For my 7mm WBY, I managed to get some Peterson brass. I have 5 loads...
-
S140 TTSX at >3100 fps Ruger #1 7 Rem Mag 65g Alliance 4000-MR
-
SExcited for that and I picked up some Norma brass for my 300 WBY. We’ll see what it does
-
SIf you want to shoot to 500 yards I'd look at a bullet that isn't a parachute in the BC department. Even just going from a 150 TTSX to a...
-
Sstd7mag replied to the thread Pondering factory loads vs starting loads.Some years ago (7-10), Remington had a recall on their green box 270 Win ammo. They ended up being loaded hot. One of the guys I work...
-
Sstd7mag reacted to mtmuley's post in the thread Pondering factory loads vs starting loads with
Like.
My son bought a couple 7-08s. Looking at the 132 HHT. mtmuley -
Sstd7mag reacted to Sheltowee's post in the thread Pondering factory loads vs starting loads with Haha.
He will, in fact, answer the phone and the last time I chatted with him mentioned this guy on HT who seemed to be a member of the Hammer...
-
Sstd7mag reacted to mtmuley's post in the thread Pondering factory loads vs starting loads with Like.
Nosler data lines up pretty well with like weight Hammers. I could call Steve and ask him, but the fact is he will answer the phone if...
-
Sstd7mag reacted to VikingsGuy's post in the thread Pondering factory loads vs starting loads with Like.
I always chase the near max node. Never start below mid point to start with. And then Hammers - they blow the doors off conventional...
-
Sstd7mag reacted to VikingsGuy's post in the thread Pondering factory loads vs starting loads with Like.
I think the rule of thumb experience is a lot of load data has a first node just short of mid-point and a second just below or at max.
-
Sstd7mag reacted to VikingsGuy's post in the thread Pondering factory loads vs starting loads with Like.
First, there are better reloading experts than me on this forum, so offer just my own experiences. TTSX and Hammer are my two go to...
-
Sstd7mag reacted to VikingsGuy's post in the thread Pondering factory loads vs starting loads with Like.
In the past I have just chatted with them and gotten their common high end pressures/velocities for a given bullet with their preferred...
-
Sstd7mag reacted to Sheltowee's post in the thread Pondering factory loads vs starting loads with Haha.
So here is a dumb question: Hammer load data only lists starting min. loads but gives a max. attainable velocity. Are you using max...
-
Sstd7mag reacted to Bullshot's post in the thread Pondering factory loads vs starting loads with Like.
I don’t know why this is sticking in my head today, but reloading wisdom says to start pretty low and work up slowly, that every rifle...
-
Sstd7mag replied to the thread Meopta warranty experience.3 months??!! Egads... Glad they took care of them for you. But that's a long wait for optics.
