Inreresting thingnhappened today.

Don Fischer

Well-known member
Joined
Jun 27, 2017
Messages
3,131
Got my 260 about five weeks ago but weather to hot to go shooting so held off waiting for cool weather. Got a day where it got a little over 80* so went out and broke in the barrel according to instructions. Then back to hot and couple more weeks and it cooled off pretty good in the evening. Started working up loads. To get going I loaded to the Max OLL and wouldn't ya know it, just barely fits in the magazine using 129gr Hornady SP'S. Just stayed there, no where else to go! Using RL-19 I started about 46.0grs With Herter 120 primer's in 308 Win Winchester cases. Like to seat bullets to the base of the neck but couldn't do it. So RL-19 really fills the case at 47.5grs, max load. Tapped the cases with a pencil at 47.5 grs and powder seteled to just below the base of the neck. Well that load grouped three shot's right at 1" so today I loaded up a bunch more. Mostly because I can't find much in the way of powder around here! Got to thinking about it today while loading and matched up a bullet to the neck with the end of the neck hitting right at the top of the crimp gruve. Damn, looked awfully close so I stuck a pen in to the powder and taped around the mouth and checked it against a bullet. Showed to stay off the powder I could seat the bullet to the top of the crimp gruve. Got to wondering about it and checked a 140gr Hornady with the crimp grouve in the same place and boy does it encrouch on the powder! works out alright though as I was wanting to shoot 129/130 gr bullet's in the 260. I use 140gr bullet's in my 7x57 and 6.5x06. of course both of those have longer action's so works out good for me! Shot the 129gr load again last night and right at 1" at 100 yds. I can live with that! This cartridge was darn near made for me, just need to bullet seated out about, well less than a 1/8th inch more. probably get 15/16" groups then! :) Really liking shooting this 260, recoil is very low and me and recoil simply don't get along well. Reason I won't ever own another magnum!
 
My favorite powders in my 260 is H414 and RL19. I really liked shooting 100 and 120gr ballistic tips, and 120 Game Kings.
 
You got any 4350 of any variety? Should be able to get good velocity without as much case fill.
 
My favorite powders in my 260 is H414 and RL19. I really liked shooting 100 and 120gr ballistic tips, and 120 Game Kings.
I have a bunch of H414 but short on data for 129/130gr bullet's. Data in my Nosler book for 125gr and thinking about cutting it back and trying with the 129gr bullet. Used it mostly in a 243 and worked great!
 
I have a bunch of H414 but short on data for 129/130gr bullet's. Data in my Nosler book for 125gr and thinking about cutting it back and trying with the 129gr bullet. Used it mostly in a 243 and worked great!
I have an original M700 in 260, with a slow twist, so didn't play around with heavier than 120s. Nosler has load data for 129/130s on their website.
 
You can use data for W760 if you see it. H414 & W760 are one in the same.

While 1" @ 100 yards is acceptable for a hunting rifle, you may want to play with the seating depth.
Just might bring it down to 0.875". ;)
 

Latest posts

Forum statistics

Threads
113,395
Messages
2,019,613
Members
36,153
Latest member
Selway
Back
Top