PEAX Equipment

Search results

  1. p_ham

    Custom Henry Big Boy, .45 Colt

    Selling this custom Henry. 16" trapper, .45 Colt Magazine conversion Upgraded trigger Skinner Express sight OD Green and Graphite Black Cerakote Internal muzzle threads w/ 5/8-24 adapter- thread protector uses choke tube wrench. $1765.00 This is a new rifle, not used. Must Ship to valid FFL...
  2. p_ham

    Takedown Rossi build

    I picked up a Rossi R92 in 38spl/357 mag. I had originally just intended on turning it into a takedown and leaving it at that. I was talking to a gentleman about wildcats, and he brought up a neat little round that he had ordered a reamer for. It's called 30 Badger, and you just run a 38 spl...
  3. p_ham

    Grandad's Model 12

    Some before and afters of this well used Model 12.
  4. p_ham

    Model 70 .223 build

    This nice Model 70 was sent in for a rebuild. It's getting a Brux 1:8 barrel, refinished stock, Pillar bedded, and some minor trigger work. This is typical for this vintage of Winchester "bedding" I think it was some type of hot melt. Unfortunately they never bothered to center the barrels...
  5. p_ham

    Cartridge engravings (keepsakes)

    Somebody had asked before about engraving cartridges to mark a special harvest. I can do them for $5+ return shipping. I haven't looked to see what padded envelopes are running these days cost wise but it's probably not much. I know hunting season is already underway, just something to keep...
  6. p_ham

    Website upgrade

    I've updated my site and added an online store. I've only got a couple things on there now, slate coasters, firearms patents, engraved pmags, it's quite a process to add everything. What products would you want to see? Gun parts? Gear? Customizable knick knacks? I'm thinking of adding a...
  7. p_ham

    Remington 24 refit

    You know it's going to be interesting when they show up like this: We're fitting and finishing some new wood on this project. The buttstock was already below the metal on the back of the receiver. I was able to grind some material off the tip of the wrist and get a little better fit. It's...
  8. p_ham

    A boy's first big game hunt

    My oldest boy turned 6 this year, and finally with an appropriate tag to take a young kid on, he got to go with me. He's been excited about it since we found out in May. We both have been excited. He's been rabbit and bird hunting a few times and enjoyed it. He's always fascinated with the...
  9. p_ham

    CCM Tikka for sale

    Selling this CCM built Tikka chambered in 7mm-08. Build list is as follows: Tikka T3x X-Caliber barrel 20" fluted 1:8 twist 5/8"-24 threaded muzzle Bedded Stocky's carbon fiber sporter Mesa bottom metal Fluted bolt Mountain Tactical bolt release and recoil lug I've gone back and forth on...
  10. p_ham

    Closing up shop

    Aug 12-20 while I'm out chasing deer!
  11. p_ham

    Ruger 77 Redux

    A member sent in their beloved Ruger for a refit. First step is to true the receiver. I checked and re-checked my setup no less than 6 times on this rifle. Most actions will completely clean up eccentric threads by going .010" oversize. This receiver had .021" of runout! Not only that, but the...
  12. p_ham

    What you need is a little "Prison Pink"

    This is a Bergara B-14 Ridge SP. It came into the shop bone stock. The barreled action and bottom metal went Sniper Gray, the bolt is Blackout black, and the Wyatt's magazines are, you guessed, Prison Pink. It's sitting in a bedded AG Composites Visigoth with an added Spartan socket. It's...
  13. p_ham

    A little goes a long ways. (Marlin 336)

    This old gal was sent in by a HT member for a little love. The aftermarket lever wouldn't stay shut. The trigger was a stout 6lbs. We added a recoil pad and knocked the gloss out of the wood finish and smoothed up the grip cap a little. A couple coats of p_ham's special blend wood finish made...
  14. p_ham

    Name that cartridge!

    Guess one, post one. I'll kick it off with a softball.
  15. p_ham

    1st time elk hunter's new rifle

    A client of mine drew their first bull elk tag in NV. Here is the rifle they ordered for the occasion. 7mm Rem Mag Tikka T3x action X-Caliber 24" 1:8 spiral flute barrel threaded 5/8x24 with a SiCo ASR mount. Stocky VG2 carbon fiber stock Mesa bottom metal 7lbs dry.
  16. p_ham

    Engraved Firearm Patent Drawings

    Alright folks, I've got a pretty healthy catalogue of patent drawings acquired. I'm offering drawings engraved on anodized aluminum, framed, in either 8.5"x11" or 11"x17". The 8.5"x11" are $20 The 11"x17" are $40 Shipping will be between $10 and $15 depending on where you're at in the lower...
  17. p_ham

    Taking the plunge.

    Well, I'm doing it. My last day at my job is set for July 17th. It's not an easy decision to break out on your own but I'm confident I can make it work. I truly appreciate all the support I've received from this community since day one. I'm going to do my best to cut lead times from what they...
  18. p_ham

    CCM Tikka build

    This one will be up for grabs when it's done. 20" 7mm-08 fluted sporter 5/8-24 muzzle threads Fluted bolt body Mesa bottom metal Mountain Tactical recoil lug and bolt stop Stockys carbon fiber sporter stock I started out by marking the flute locations with the laser. This greatly reduces the...
  19. p_ham

    Im sorry, BrentD.

    And BenLamb, Shrapnel... The whole tactical lever thing isn't really my cup of tea but I don't make a habit of saying "no" when a client brings me an idea. I made the brake, the buttstock is from Chisel Machine, forearm is Midwest Industries, optic mount is Hoptic USA, and it's topped with a...
  20. p_ham

    Gauging interest- laser engraving

    The wife has decided she's ready to help really get the business off the ground. We're putting some feelers out on possible products. I'm showing her the ropes of the system now as well as image processing and the licensing process. We're looking at images on painted/anodized aluminum and...
Back
Top