It looks like you may be right. I don’t know if you can see in these pics, but I found that the seating die is changing the shape of the shoulder, and one round developed a dent
Update: I reset the resizing die (a brand new Lyman full length resizing die) all the way down to contact the shell holder then backed it off about a quarter turn. An empty case sized this way chambers with no issue. Then I loaded up some live rounds, using the minimum charge and setting the...
The load isn’t compressed. When you shake it, you can hear the powder moving around. This got me thinking though. The rounds I chambered a couple weeks ago at the bench were dummy rounds, sized and with bullets seated, but no powder. I wouldn’t have thought adding powder in a non-compressed load...
COAL is about 20 thousandths longer. Factory loads are 200 grain federal premium trophy bonded tip. I’m using 205 hammers for the reloads.
I also found that the diameter at the neck seems to be running slightly bigger than the factory loads by a few thousands also.
I don’t worry about it at all during gun season. Mostly earth tone pants and shirts from 5.11. One if those super light, netting style over-suits in camo is good for bow season and will go over anything. Other than that, its not worth the ridiculous price. Plus, you don’t look like such a dufus...
I’m looking for some advice. I am working on my first ever handload. Its for a 338 win mag. I loaded up my first batch of test rounds and they chambered with no problems at home, a couple weeks ago. I went to the range this morning and none of them will chamber, they are all too tight. Factory...
I picked up some RL19 from Brownells and some Power Hammer 205s. But I’m dead in the water until I can find primers. Checking the websites several times a day. This is crazy